In your catalog you’ve said more than once that “making the wheels coplanar” on a bandsaw is an important part of tune-up, but as far as I know you haven’t described how to do it. I have just a few questions: what is it, how do I know if I need it, and if so how do I do it?
Diamond stone fans will now be able to hone a fine edge on their tools without switching abrasive types. The 3-micron grading makes this stone similar in performance to a hard Arkansas, a 6000-grit waterstone or an extra-fine ceramic stone, plus there’s no break in period.
I had a mahogany front door installed on my house about 8 months ago, and the finish is already peeling off. The installer said they used an exterior finish purchased at a home center. Why didn’t the finish last longer, and how should I go about fixing it?
John L. of Henry County, Kentucky, just emailed us telling us his experience with his new Bodger turning tools. John wrote:
“I can proudly say that these tools are the best turning tools I own. I’ve noticed they really keep an edge, and the steel is really hard! I also really like the handle design. If I had to rate them on a scale of 1 to 10, they would be a 12. Thanks again for making these wonderful tools!”
The Georgia Association of Woodturner’s meets in our Seminar Room tonight at 6:30pm. They are open to visitors, so come by and check it out. Alan Leland will be demonstrating. Alan grew up in New Canaan, Connecticut, then attended East Carolina University. After budget cuts prevented him from pursuing corrections as a career, he worked […]
The more skilled you become at resawing, the more you take it for granted that any stock thickness your heart desires is yours for the making. Resawing isn’t difficult, but it is a skill, which has to be learned just like any other. As usual, practice is the direct route to expertise—and as usual, the better you understand the tool the more effectively practice will teach you what you need to know. Of the main factors that go into successful resawing (blade selection, tension, feed rate and accommodating lead angle), understanding the blade’s lead angle is by far the most critical part of setup.
This sandpaper-based sharpener is a good value for the budget conscious woodworker or the enthusiast who wants to forego the learning curve of other methods. The Work Sharp is designed to sharpen carving tools, chisels and plane irons up to 2″ wide. The 1/5 HP motor spins at a comfortable 580 rpm, so you can easily sharpen other tools freehand.