Page 48 - highland-woodworking-earlyfall2022-catalog

Drilling Tools & Accessories

MANUAL MILESCRAFT DRILLMATE
WOOD THREADER PORTABLE DRILL GUIDE
These classic thread box The convenience, accuracy & repeatability
and tap sets let you of a drill press wherever your drill can go.
produce matching An adjustable depth stop permits pro-
screws and nuts in your favorite wood. duction drilling for repetitive jobs;
Matching taps come with an adjustable steel han- return springs keep the drill up and
dle. Two taps are included, one for starting/through out of the way between jobs. V-notches
cutting, the other a bottoming tap for blind holes. in the base hold dowels for accurate center drill-
Both taps & die cutter can be easily resharpened ing. Guide rods set for 45°, 60°, 70° & 90° drilling.
when needed. Threader body is plastic. The size indi- Using the spring and the depth stop, the maximum
cates the size of the dowel used to make the male drilling depth is 6.3”. When they are removed it is
threads. Best for use in hard, closed-grained woods like 8.23”. Fits motor housings up to 3-1/2” wide. In-
maple & cherry. cludes 3/8” drill chuck.
477721 Manual Wood Threader - 1/2” $49.99 475131 DrillMate Portable Drill Guide $39.99
477722 Manual Wood Threader - 3/4” $54.99
477723 Manual Wood Threader - 1” $57.99 SELF-CENTERING
477724 Manual Wood Threader - 1-1/4” $63.99 DOWELING JIG
477725 Manual Wood Threader - 1-1/2” $69.99 Centers 1/4”, 5/16”, 3/8”,
477714 Repl. Cutter $11.99 7/16” & 1/2” holes on the
INDUSTRIAL CIRCLE CUTTER edge of any board 1/2” to 2” thick.
Cut 1-3/4”– 8” dia. circles on your drill press Uses standard-length twist or bradpoint bits.
This heavily-built tool cuts to a max. 477501 Self-Centering Jig $59.99
1” depth. Shank dia. is 1/2”. 1/2” hex- DOWL-IT 2500
agonal beam has grads for easy set-up. You can drill several side-by-
473002 Industrial Circle Cutter $37.99 side holes without moving this
(1/8” Allen wrench included) self-centering jig. 4 threaded guide
AUGER GIMLET 7-PIECE SET holes accept screw-in drill bushings, (in-
Black finish tempered steel Gimlets cludes 2 each 1/4”, 5/16” & 3/8”). Space
excel at boring holes in hard to holes at 3/4”, 1-1/4”, 2” or 2-3/4” on center.
reach areas and make precise pilot 477507 Dowl-It 2500 Jig $69.99
holes for #2-9 screws. Replacement Bushings $7.99 each
177022 Auger Gimlet Set $17.99 477504 477505 477506
5/64”, 3/32”, 1/8”, 9/64”, 5/32”, 11/64” & 3/16” 1/4” Bushing 5/16” Bushing 3/8” Bushing
KREG CONCEALED HINGE JIG For clean holes in the correct position, offset & depth.
This jig positions hinges 2” or more from top or bottom of a door with offsets of 3, 4,
5, & 6mm. Includes base with index cams, drill guide, stop collar with hex wrench,
35mm carbide-tipped drill bit & manual. 124141 Kreg Concealed Hinge Jig $32.99
KREG SIZE QTY. QTY. QTY.
POCKET HOLE SCREWS INTERIOR MICRO POCKET FINE THREAD PAN HEAD
Strengthens & Clamps!
3/4” 124074 100 $5.99 124075 500 $27.99 475393 1200 $52.99
STAINLESS STEEL MAXI-LOC INTERIOR FINE (F) & COARSE (C) THREAD PAN HEAD
FINE (F) & COARSE (C) THREAD 1” F 475351 100 $6.50 475361 500 $28.99 475394 1200 $62.99
SIZE QTY 1” C 185405 100 $6.50 185464 500 $28.99 475391 1200 $52.99
1-1/4” F 185443 100 $26.99 1-1/4” F 185471 100 $6.99 185472 500 $29.99 475395 1200 $54.99
1-1/4” C 185434 100 $26.99 1-1/2” F 185475 100 $7.50 185476 500 $32.99 475396 1200 $59.99
1-1/2” C 185437 100 $30.99 INTERIOR FINE THREAD MAXI-LOC
2-1/2” C 185440 50 $36.99 1-1/4” 475352 100 $6.99 475362 500 $29.99 475388 1200 $54.99
2-1/2” C 185441 250 $149.99 1-1/2” 475353 100 $7.50 475363 500 $32.99 475390 1200 $59.99
2-1/2” C 185442 2000 $584.99 INTERIOR COARSE THREAD MAXI-LOC
POCKET HOLE WOOD PLUGS 1” 475354 100 $6.50 475364 500 $28.99 475379 1200 $52.99
QTY. 50 1-1/4” 475355 100 $6.99 475365 500 $29.99 475380 1200 $54.99
475451 Oak $10.99 1-1/2” 475356 100 $7.50 475366 500 $32.99 475383 1200 $59.99
475452 Maple $10.99 2” 185404 50 $5.50 185414 250 $22.99 185462 3000 $89.99
475456 Pine $10.99 2-1/2” 475358 50 $7.50 475378 250 $29.99 185463 2000 $89.99
185410 Paint Grade $7.99 BLUE KOTE COARSE THREAD MAXI-LOC
Weather resistant
MICRO POCKET WOOD PLUGS
QTY. 65 1-1/4” 185422 100 $9.50 475382 1200 $74.99
475459 Paint Grade $7.99 1-1/2” 185425 100 $9.99 475385 1200 $79.99
2” 185428 50 $6.99 185429 250 $26.99
2-1/2” 185431 50 $8.50 185432 250 $32.99
KREG USE SCREW LENGTHS TO JOIN THE SAME THICKNESS STOCK.
DRAWER MATERIAL THICKNESS 1/2” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2”
SLIDE JIG
Quick & Easy Installation! SCREW LENGTH 1” 1” 1-1/4” 1-1/2” 1-1/2” 1-1/2” 2” 2” 2-1/2”
(Clamp not included)
This jig holds the slide in position as you drill holes & install screws. It
also holds the drawer in proper alignment so you can drill mount the slide to the drawer body. For epoxy-
coated, undermount & ball bearing slides 12” & longer on framed or frameless cabinets at least 14” deep.
124140 Kreg Drawer Slide Jig, Pair (instructions included) $32.99
46 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748