Page 43 - highland-woodworking-earlyfall2022-catalog

Wood Files, Rasps & Rifflers

NAREX HAND CUT CABINET RASPS
These Narex rasps’ differently sized, smaller & more closely spaced teeth are
set right up to the edge of the 10” blank, so not only do you have more teeth
cutting but you also can cut right up to adjacent surfaces. Half-round profiles
taper from 1-1/8”wide to 147241 Narex Coarse Cabinet Rasp $92.99
3/4”. The stained hornbeam 147242 Narex Medium Cabinet Rasp $109.99
wood handles have brass ferrules. 147243 Narex Fine Cabinet Rasp $146.99
RC 49 carbon steel. OAL 15-1/2”. Grade of cut close to old Nicholson #50 cabinet rasp.
IWASAKI CARVING FILES These files are a woodworker’s dream!
These files remove material quickly like a rasp, but leave a very clean surface finish. The
curved teeth are arranged like a single cut file, but with the face of each tooth shaped like a
mini-chipbreaker. A shaving is
Iwasaki Carving File Files are OAL Cutting Wide Thick forced up & away from the face
unhandled except where indicated, w/hdl. Length
of the file so the teeth
127505 6” Flat Fine 7-3/4” 5-3/8” 5/8” 5/32” $31.99 are less prone to clog.
127506 6” Flat Extreme Fine 7-3/4” 5-3/8” 5/8” 5/32” $32.99 Tailings aren’t dust, but
127507 6” Half Round Fine 7-5/8” 5-1/4” 5/8” 1/8” $31.99 ultra mini-shavings that look as
127508 6” Half Round Extreme Fine 7-5/8” 5-1/4” 5/8” 1/8” $32.99 if they came from a tiny plane!
Handles are textured rubber. All
127526 6” Half Round Fine Curved 7-1/2” 5-1/4” 5/8” 1/8” $39.99
127503 8” Flat Medium 9-1/2” 7-1/4” 25/32” 3/16” $29.99 files (except the Edge Float) have
smooth edges & are perfect for
127501 8” Flat Medium w/hdl 8” 4” 5/8” 5/32” $19.99 detailing up to an adjacent sur-
127509 8” Flat Fine 9-1/2” 7” 25/32” 3/16” $34.99 face you don’t want to cut. Use
127510 8” Flat Extreme Fine 9-1/2” 7” 25/32” 3/16” $36.99 them on standard woods, or on
127513 8” Flat Extreme Fine w/hdl 8” 4” 3/8” 1/8” $29.99 bamboo, OSB, MDF, plastics &
127504 8” Half Round Medium 9-1/2” 7-1/4” 13/16” 5/32” $29.99 resins.
127502 8” Half Round Medium w/hdl 8” 4” 5/8” 3/32” $19.99
127511 8” Half Round Fine 9-1/2” 7-1/4” 13/16” 5/32” $34.99
127512 8” Half Round Extreme Fine 9-1/2” 7-1/4” 13/16” 5/32” $36.99
127514 8” Half Rd. Ext. F. w/hdl 8” 4” 3/8” 3/32” $29.99
127527 8” Half Rd. Ext. F. Curved w/hdl 7-7/8” 4” 3/8” 1/8” $29.99
127528 8” Extra Fine Side Float w/hdl 8” 4” 1/8”-5/8” 1/8” $54.99 Flat have teeth on both sides.
127529 8” Extra Fine Edge Float w/hdl 8” 4” 1/8”-5/8” 1/8” $49.99 Half Round have teeth on one side.
127524 10” Flat Coarse 12-1/8” 8-3/4” 1” 1/4” $39.99 Curved files have a 7-1/2” radius,
with teeth on the convex side.
127525 10” Half Round Coarse 12-1/8” 8-3/4” 1” 1/4” $39.99
Side Float has teeth on one side.
127521 3mm Round Extra Fine w/hdl 8” 3-1/2” 1/8” $18.99
Edge Float has teeth on one edge.
127522 6mm Round Smooth w/hdl 8” 4” 1/4” $25.99 Sizes are approximate due to
127523 8mm Round Smooth 9-5/8” 7-1/4” 5/16” $34.99 metric conversions.
AURIOU RASPS & RIFFLERS
Auriou rasps have teeth that are individu-
ally “hand-stitched” with a punch that makes AURIOU CABINET RASPS
carefully sized, triangular points in an irregu- Right H Left H Length Grade Width
lar pattern, preventing furrowing, for a superior finish. 124433 124753 8” 11 7/8” $119.99
Auriou’s craftsmen prepare the rasp blanks by forging &
hammering, not stamping. Distortion caused by initial 124432 124469 9” 10 1” $124.99
heat treating is corrected by more hand-hammering & fi- 124704 124705 10” 7 1-1/4” $134.99
nally the blank is polished. G numbers indicate tooth size 124431 124706 10” 9 1-1/4” $144.99
(grade of cut). A higher # is a finer cut. (#8 approximates a 124707 124708 10” 11 1-1/4” $159.99
Nicholson #50.) Length doesn’t include 5” walnut handle. 124460 124711 12” 6 1-1/2” $149.99
Modeller’s Rasps are shaped like a cabinet rasp, but 124430 124712 12” 8 1-1/2” $159.99
with a longer taper at the end & a slightly thinner profile, 124713 124714 12” 10 1-1/2” $169.99
so they are a bit more nimble in the hand. 124715 124716 12” 12 1-1/2” $189.99
The ALBI Combo Rasp is double sided. AUROIU MODELLER RASPS
Auriou Ironing Rasps’ curved shape gives clearance for
your knuckles. 124717 124718 6” 15 7/16” $129.99
The Curving Rasp 124435 124719 7” 13 1/2” $119.99
(Chairmaker’s Rasp) is a large specialized curved riffler 124758 124759 10” 9 29/32” $139.99
with a round-ended half-round stitched rectangle on one 124760 124761 10” 11 29/32” $154.99
end, & a half-round stitched V on the other. AURIOU ALBI COMBO RASP
For ultra-fine detailing, Needle Rasps’ cutting surfaces 124740 124741 10” 5 & 9 1” $119.99
are approx. 2-3/4” x 1/4” (flat, rat, half-round & knife.). AURIOU CURVED IRONING RASP
124720 124721 2-3/4” 12 3/8” $69.99
124436 124765 3-1/4” 10 3/4” $72.99
AURIOU RIFFLERS 8” Long Grade 12 $82.99 ea.
AURIOU CURVING RASP (CHAIRMAKER’S RASP)
124451 Flat V & Rect
124453 Half Round & Tri 124748 10” 7 7/8” $99.99
AURIOU RAT TAIL RASP
124450 Knife & Spoon
124736 Rat Tail & Oval 124463 6” 13 1/4” $89.99
124725 Rhombus & Brush 124701 10” 9 3/8” $109.99
124732 Thumb & Laurel 124471 7” Auriou 4-Pc Needle Rasp Set $189.99
AURIOU TOOLS ARE EXPERIENCING LIMITED AVAILABILITY 41