Page 45 - highland-woodworking-earlyfall2022-catalog

Assembly Tools

VERITAS POWER NEW! PEDDINGHAUS WARRINGTON
TENON CUTTERS CROSS PEEN HAMMER
These fine tools pro-
duce clean round tenons Ideal for assembling
with cleanly radiused delicate joinery and seating narrow pins.
shoulders on the ends of branches, sticks or formal This old cabinetmakers’ favorite has a standard
stock. With typical Veritas attention to detail, anod- round face on one side of the head & a flat peen at
ized aluminum bodies are accurately balanced to 90° to the handle on the other side.
run smoothly in either hand-held power drills or bit 161701 Cross Peen Hammer (6oz - 175g) $25.99
braces. Easily resharpen blades with a drum sander 161704 Cross Peen Hammer (11oz - 310g) $33.99
mounted in a drill press, using a honing guide built CRUCIBLE LUMP HAMMER
in to each tenon cutter. Sizes 5/8”–1” have 3/8” hex The compact Crucible requires less effort to
shanks & cut tenons up to 2-3/4” long. 1-1/2” & 2” use than a traditional wooden
sizes have 1/2” hex shanks; they cut serious tenons mallet & you’ll never need
up to 4-1/4” long, suitable for beds and for other MADE IN USA to replace it! The 1-1/2” x
large-scale work. 1-1/2” x 4”, 2.2 lb. head, (2.5 lbs total weight)
For Tenon cutters 5/8” to 1” the max. stock dia. is is made of 4140 alloy steel, hardened & tempered to
Tenon dia. + 1-1/8”. For Tenon cutters 1-1/4” to 2” Rc 28-32. Hand finished faces are smooth-ground at
the max. stock dia. is Tenon dia. + 1-1/2”. Not for a 5-1/2” radius. Choke up on the handle to adminis-
use in drill presses. ter careful taps on delicate work & grip the handle at
175411 5/8” Power Tenon Cutter $119.99 its end to deliver a wallop with persuasion for hard
175412 3/4” Power Tenon Cutter $119.99 to assemble parts. Designed by Raney Nelson.
175414 1” Power Tenon Cutter $129.99 433257 Crucible Lump Hammer 11-1/2” OAL $92.00
175416 1-1/2” Power Tenon Cutter $149.99
175418 2” Power Tenon Cutter $159.99 THOREX 11-712 NYLON FACE HAMMER
175419 Tenon Cutter Repl.Blade $28.99 Long wearing 1-1/2” Paul Sellers says these
dia. white nylon faces are excellent mallets for
STARRETT AUTOMATIC assembly & chisel
CENTER PUNCHES unscrew from the head use.
These indispensable for replacement. Rugged
tools have an internal trip hammer for one handed nylon handle has a rub-
use. Use them to accurately start drilled holes. Ro- berized, textured pattern grip. OAL 12”. 1.5 lbs.
tate the cap to adjust impact pressure; light pres- 173731 Thorex 712 Nylon Face Hammer $42.99
sure for wood to heavy pressure for cast iron. Self- NAREX BENCH MALLETS
centering model is perfect for hinge installation. These bench mallets
461549 Starrett Center Punch $49.99 are made from tough
461548 Starrett Self-Centering Punch $54.99 European beech. A good choice for driving
chisels & gouges & for joinery assembly work!
VERITAS “SNUG PLUG” Tapered Plug Cutters 146073 4” Narex Mallet (OAL 12”, 1 lb.) $25.99
These well-made plug cutters create smoothly ta-
pered plugs to ensure a tight, accurate fit in screw 146074 5” Narex Mallet (OAL 14”, 1.5 lbs.) $26.99
countersinks, even if the TAPERED PLUG VAUGHAN RAWHIDE
countersink isn’t perfect. Sides are smooth
since they’re MALLETS
477012 1/4” $20.99 shaved to size The original old timer’s
477015 5/16” $21.99 while being cut. “non-marring mallets” before
REGULAR PLUG
477013 3/8” $21.99 petro-chemical composite plastics emerged.
Sides are rough
477016 7/16” $23.99 because of fiber Heads are made of tightly compressed, rolled &
477014 1/2” $23.99 tearing. seasoned rawhide. Hardwood handles.
129505 12 oz. Rawhide Mallet $42.99
477011 Set of 3 Veritas Snug Plug Cutters $54.99
(1/4”, 3/8”, 1/2”) (1-7/8” face dia., 13-1/2” OAL)
129506 24 oz. Rawhide Mallet $69.99
3-IN-1 COUNTERSINK SET (2-3/4” face dia., 16-1/4” OAL)
Use these 3 interchangeable cutters
1/2”, 5/8” & 3/8” to countersink the DEADBLOW MALLETS
most common wood screw sizes. Also Hundreds of met-
handy for deburring metal. al shot inside the
185503 3-in-1 Countersink Set $14.99 head give maximum striking force without re-
bound. Durable, non-marring polypropylene
BRAD DRIVER head & handle.
This Crown magnetic tack driver is 146084 6 oz. Deadblow Mallet $15.99
handy for installing finishing nails up to 1” long and 146085 12 oz. Deadblow Mallet $19.99
works in tight corners & hard to reach places. Insert 146086 22 oz. Deadblow Mallet $29.99
the nail into the magnetic barrel which retracts as the
nail is installed using palm pressure on the handle. WOODEN SHOP MALLET This excellent
172110 Brad Driver $26.99 general purpose mallet has a 10” beech han-
SCREW GRIPPER PLIERS dle & a 2-1/4” dia. x 4-3/4” long ash head.
Reach into tight spots to 146072 Wooden Shop Mallet (0.6 lbs.) $17.99
securely grab damaged screws
from 1/8” to 9/16” dia. Excellent J ROLLER Use two hands with this 3”
machining has carefully ground surfaces, wide hard rubber roller for void-
accurately mated jaws and keenly cut teeth on free laminating & veneering. It will apply
both the jaw & nose. even pressure without shifting your stock.
146607 Screw Gripper Pliers (6”) $29.99 167209 High Leverage J Roller $19.99
GO TO HIGHLANDWOODWORKING.COM TO SEE OUR COMPLETE PRODUCT LINE 43