We are excited to be attending this year’s edition of the Lie-Nielsen Open House. The annual event never disappoints, with a great group of hand tool event staff showing off the latest additions to the Lie-Nielsen line. There will also be a diverse group of guest demonstrators present, showing off their wares and creations. And don’t […]
This article first appeared in the December 2013 issue of The Highland Woodturner. There was an accident involving a ceramic coffee container, which was a gift from my in-laws. More specifically, I accidentally dropped and shattered the lid of the container. After pondering this tragic accident, I realized I could turn a replacement lid. CLICK […]
The technique of split turning is most commonly associated with furniture from the 16th and 17th centuries but can be used for any project that requires a half round column. Curtis Turner recently used split turning to turn a curved sanding block, and he wrote about it in the June issue of The Highland Woodturner. […]
Repair knots, cracks, bark inclusions and other defects in natural, live edge, wood tops. In this video Steve Johnson, the Down to Earth Woodworker, shows us how he fills knots and stabilizes bark inclusions with two-part epoxy… and he shows us how he messed one up and fixed his own mistake!
Over the course of the past 36 years, Thomas Lie-Nielsen has become America’s preeminent toolmaker. His woodworking tools are highly sought-after today not only for their proven performance, but also for the superb standard of excellence incorporated in their manufacture, a quality that has been recognized by discriminating craftsmen worldwide. Highland Woodworking has taken delight […]
In a previous article I wrote about updating a honing guide board so it would work with my new Lie-Nielsen Honing Guide, and to make sure the angle blocks match the reality of my new tool. In this article, I’ll try to provide enough basic information so that anyone reading this can hopefully glean enough to […]
In the June 2017 issue of Wood News, Forrest Bonner shares how he installed the 10 inch Eclipse Quick Release Bench Vise onto his 40 year old workbench. When I made my workbench some 40-odd years ago, there were no readily available workbench plans as there are today. I had been reading Tage Frid and James Krenov and those books […]