Page 22 - Highland Woodworking Tool Catalog

Marking & Measuring CROWN CUTTING GAUGE
Crown’s beech cutting
®
VERITAS WHEEL MARKING GAUGES gauge is used to incise clean
The hardened steel lines across the grain when lay-
cutting wheel on these gauges ing out dovetails & other joints.
starts & marks smoothly, with no worry It cuts the visible shoulder of the joint before the
about attack angle or tearing during cross-grain saw is used for stock removal. OAL 8”.
marking. The inside bevel pulls the gauge tight to 461113 Cutting Gauge $28.99
stock & resists following grain. Unmarked bar. CROWN MARKING &
®
467010 Veritas Wheel Marking Gauge $44.99 MORTISE GAUGE
177028 Micro-Adj. Wheel $49.99 Combination
Marking Gauge gauge has a fixed spur & an
177029 Graduated Micro-Adj. Gauge $53.99 adjustable spur with a brass OAL 7-1/2”
®
VERITAS DUAL MARKING GAUGE pull slide for laying out mortises on one side. The
This gauge has twin rods to other side has a single spur for regular marking. A
transfer & scribe 2 different knurled brass knob locks headstock.
settings at a time. Hardened OAL 7-1/4” 461114 Marking & Mortise Gauge $56.99
cutting wheels have opposing bevels on the waste
side of a cut. Internal O-ring & locking thumb- CROWN DELUXE MARKING
screw allow easy adjustments. Scribe up to 5-3/4” & MORTISE GAUGE
wide. Cutters recess into the brass face for storage. This deluxe gauge
OAL has a thumbscrew operated slide for
®
177069 Veritas Dual Marking Gauge $69.99 7-1/2” precise setting of mortise width.
177070 Outside Repl. Cutter (Dual Gauge) $6.99
177071 Inside Repl. Cutter (Dual Gauge) $6.99 461116 Deluxe Marking & Mortise Gauge $92.99
®
VERITAS IMPROVED MICRO-ADJUSTING HAMILTON 4” CHERRY
WHEEL MARKING GAUGE MARKING GAUGE
The smooth stainless- This handsome gauge is made
steel rod’s inner shaft has fine internal from wild black-cherry with brass
threads to adjust the hardened steel wheel inlays. The 3” wide, low profile
cutter within 1/4”. Setting secures with a locking fence slides on the 4” long slid-
knurled brass knob. The rod is off center through ing dovetail beam & rests 3/8” below the blade, let-
the 1-13/16” dia. brass head, giving more surface ting you scribe lines as it lays flat. Cryogenically
area to square up to stock & stopping the gauge heat treated 1095 spring steel blade is hand honed
from rolling away. The wheel cutter works better to 8000X. (Rc 60-62) The fingernail grind shape
than pin scoring; you don’t have to tilt the gauge scribes in both directions & pulls the fence tight
to scribe a chatter-free line & it avoids following against stock. 2-7/8” max. fence to cutter setting.
wood grain. A single sided bevel wheel pulls the
gauge snug to stock. The rod accurately transfers 434001 Hamilton Marking Gauge $75.00
depth dimensions. Cutter & rod retract into the 3D SQUARES Excel as temporary
head. Stainless steel rod is available to upgrade earlier jigs & fixtures for keeping carcasses
models of Gauges.* aligned during assembly.
®
177138 Veritas Improved Micro-Adj. $73.99 These 5/32” thick squares
Wheel Marking Gauge are milled straight & square to
®
177139 Veritas Upgrade Rod* $39.99
within .002” over their length. 6” x
1-1/16” legs & clamp surfaces have six 3/16”
ANGLE CUBE
DIGITAL GAUGE holes to attach jigs or temporary fastening.
Adjust & set tilt angles of 163608 3D Aluminum Squares (pair) $29.99
saw blades, machine tables
& fences to within 1/20° STEEL ENGINEER’S SQUARES
An internal sensor measures 9V battery Durable engineer’s squares have reli-
absolute level. 1/2” high LCD included able accuracy both inside and out. Per-
characters invert when unit is upside down. Magnets fect for joinery and the accurate calibra-
on 3 sides give placement flexibility. Hold function tion of jigs & machines.
locks in reading. 2-5/32” square x 1-3/16” thick. 169311 2” Engineer Square with case $9.99
169310 Angle Cube Digital Gauge $39.99 169312 4” Engineer Square with case $12.99
169313 6” Engineer Square with case $16.99
DIGITAL PROTRACTOR & RULES Uses 3 V 169314 Set of 3 Engineer Squares $38.99
Digital protractor bevel squares battery
display 0 to 360° to the nearest SHINWA COMBINATION SQUARE
1/10th°. Clear 1/2” digital dis- Precise combination 90° & 45°
play reverses to read upside stainless steel try square. 1/16ths
down. 1-1/8” wide steel legs have 1/16, 1/32, 1/64 grads. Miter side measures
& mm etched grads. 10” leg has 8” of grads. Knurled vertical distance. 4” x 6-1/4”.
locking knob secures legs. Hold button displays 466405 Shinwa Combination Square $23.99
your reading even if you move a leg.
SHINWA SADDLE SQUARE & MITER
169336 10” Digital Protractor $21.99
Metric aluminum miter square
®
VERITAS BEVEL GAUGE carries layout lines around cor-
Quickly check a tool’s cutting angle ners at 45° & 90°. 60 mm wide
2-1/2” dia. 1/16” thick brass angle faces have cutouts for mark-
checker has 3/4” deep slots; 15°, ing inside the square’s body.
20°, 25°, 30°, 35°, 40° & 45°. 6-5/8” long
146801 Shinwa Square & Miter $19.99
177032 Veritas Bevel Gauge $12.99
®
22 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748