Page 17 - Highland Woodworking Tool Catalog

Workbenches & Hardware

HOFMANN & HAMMER
LARGE PREMIUM GERMAN WORKBENCHES
85” x 25-1/2” The workmanship of these fine benches is simply outstanding.
34-1/2” high Workbenches come ready for assembly. (Just bolt the stretchers to the legs, &
286 lb
lay on the top.) The solid beech stock is clear, straight & beautifully finished.
The Large workbench has a wooden jaw shoulder vise mounted flush
with the left end of the bench, a tail vise that serves as a dog vise, vise
ALL-AROUND handles, a pair of steel square bench dogs, a full-length tool well & a drawer.
71” x 23-5/8” The All-Around has round dog holes in the bench top & tail vise, with a
34-1/2” high double row of holes across the top’s width that work with the front shoulder
220 lb
vise. Holes along the front apron are for handling large panels & doors. Top
is continuous, with no tool well. See round bench dogs (sold separately) below.
Truck shipping charges apply. Contact us for a truck shipping quote.
Hofman & Hammer Shoulder Vise Width/ Tail Vise Width/ Front Edge Work Surface
German Workbench Max. Vise Opening Max. Vise Opening Thickness Thickness
114103 Large Workbench 19-3/4” / 9-1/4” 6” / 10-1/4” 4-1/2” 2-1/4” $1999.99
114146 All-Around Workbench 19-3/4” / 7-1/2” 6” / 6-1/2” 4” 2” $1799.99
ROUND ALUMINUM BENCH DOGS HOFMANN & HAMMER
Milled, sloped face secures stock & a fric- SIDE BENCH DOGS
tion spring holds the dog in 3/4” dia. hole Side dogs allow you to
in any thickness benchtop. Sold in pairs. clamp a workpiece on the
169134 Round Alum. Bench Dogs $21.99 front face of your workbench using
(4-3/8” long post) dog holes in the top of your bench,
169135 Short Round Alum. Bench Dogs $17.99 tail or end vise. The post drops into the dog hole
(2-1/4” long post) and hangs over the edge of the workbench to gap
169136 Set of 4 Round Aluminum Dogs $32.99 your workpiece. Swiveling jaws adjust to any
(2 standard & 2 short) bench. Fits round & square holes that accept a 19
VERITAS ROUND BRASS mm (3/4”) dia. post. The dog hole edge can’t be
®
BENCH DOGS & PUPS ® more than 50 mm (~2”) from bench edge.
Friction springs keep the 3/4” dia. posts 114152 H&H Side Bench Dogs pair $79.99
snug in any bench top thickness. 5° un- (includes 1 right & 1 left side dog)
dercut face grips securely & rotates to ® ® ®
hold stock that isn’t square. Sold in pairs. VERITAS WONDER DOG & PUP
Mount into a 3/4” dia. hole to
419714 Veritas Round Dogs (4-3/8” post) $37.99 create a holding system with-
®
®
®
419715 Veritas Round Pups (2-1/4” post) $31.99 out using a tail vise – perfect
®
VERITAS MUZZLES Amazingly useful for retro-fitting into benches
FOR BENCH DOGS OR PUPS ® accessories for built without dogs. They pivot
Hard plastic spring-grip sleeves slip any bench! in any direction. Post is minimum
on Veritas® Dogs & Pups® (& round aluminuum 7/8” above bench. 3/4” high brass clamps.
dogs, above) to cushion the surface. 6 face ribs Screw angles 2° for secure grip & a steel spring wire
grip tightly without marring. Sold in pairs. prevents slipping.
®
®
177082 Veritas Muzzles - Pups 3/4” high $2.99 417004 Veritas Wonder Dog (4-3/4” post) $46.99
®
®
®
®
177081 Veritas Muzzles - Dogs 1-1/4” high $3.50 417007 Veritas Wonder Pup (2-5/8” post) $42.99
®
®
VERITAS PRAIRIE DOG Stays ready & out of your way until you need it.
A press of your anism fits holes 2” to 2-1/2” deep. Use Stop
finger will pop the Plates with rare earth magnets (included) on
3/4” dia. solid brass through holes & pivot them aside when not in
Prairie Dog out of its use. In blind holes, countersink a washer (includ-
hole and lock it in ed) at the bottom. Optional stop plates allow
place, standing 5/16” use in additional holes.
proud. Simply press 177086 Veritas Prairie Dog pair $34.99
®
it again to retract it back out of the way. Spring mech- 177087 Prairie Dog Stop Plates 4 pk $5.50
BENCHCRAFTED
SWING AWAY SEAT HARDWARE WITH QUARTERSAWN OAK SEAT
Many projects involve precise, close up work which requires a steady hand & is best
performed while seated. Based on a classic swing seat design, the Swing Away Seat mounts
to a workbench, (eliminating the need for a stool & saving valuable shop floor space),
so you’ll always have a sturdy seat available. Swing it out when needed &
simply tuck it back under the bench when done.
Cast iron with a powder coated black finish, the heavy duty mount & bracket are joined
with steel pivot pins (pivots slightly over 180°). It easily handles the weight of a large adult.
11” diameter seat is finely crafted of
quartersawn white oak with a chest- 135198 Swing Away Mount, Bracket & Seat $285.00
nut lacquer finish. Height is 13” with the 135197 Swing Away Mount & Bracket $231.00
7/8” thick seat. OAL 21-1/2” with seat (19” Please note, mounting hardware is not included.
OAL without seat). Select the mount & See instructions for the recommended hardware.
bracket without the seat, so you can create Weight restrictions determined by mounting hardware
a seat of your own design. you provide for attaching the seat to your workbench.
SEE MORE WORKBENCHES & ACCESSORIES AT HIGHLANDWOODWORKING.COM 17