Page 20 - Highland Woodworking Tool Catalog

Marking & Measuring MADE IN USA

STARRETT PRECISION RULES STARRETT
3/64” thick, slightly flexible spring- COMBINATION SQUARES
tempered steel rules have sides graduated in
64ths & 32nds, and in 16ths & 8ths. Multi-
plate satin chrome finish. 6” rule has vertical
grads in 32nds on both ends of one side, helpful
for measuring edges in tight places & for router bit Versatility & reliable accuracy makes these
or saw blade set-up. squares indispensable in any shop.
461511 6” Rule w/end grads (3/4” wide) $40.99 Starrett squares have hardened and tempered
461512 12” Precision Rule (1” wide) $61.99 brushed steel blades with one side graduated in
461513 24” Precision Rule (1-1/4” wide) $154.99 64ths & 32nds, and the other in 16ths & 8ths. The
4” & 6” combination squares will fit in your pocket
STARRETT to keep handy for lay-out, set-up & joinery jobs.
DOUBLE SQUARES The 12” combination square has a convenient 10”
A versatile alternative usable blade for layout and checking cut-off accu-
to fixed squares, these delightfully
handy squares are accurate inside & racy. The precision milled cast iron heads have a
out. The adjustable blades (graduated black wrinkle finish.
in 8ths, 16ths, 32nds & 64ths) let you check square 461568 4” Starrett Combination Square $124.99
in places too tight for fixed blades & set them for 461520 6” Starrett Combination Square $139.99
scribing or marking set depths. 6” has a spirit level. 461521 12” Starrett Combination Square $145.99
461524 24” Blade for 12” Comb. Square $170.99
461525 4” Starrett Double Square $104.99 461561 12” Combination Square Set $349.99
461526 6” Starrett Double Square $126.99 12” Blade, 12” Center Head,
12” Protractor Head & Plastic Case
PRECISION SHINWA SLIDING BEVELS 161015 Fitted Wooden Case $87.99
The nicely crafted, solid stain- (for 12” Combination Square Set)
less steel Small Sliding Bevel is 9/16” wide
& 1/4“ thick. The thin profile allows ac- STARRETT MACHINIST’S BLUE DYE
This opaque, fast-drying dye gives you
curate transfer of angles to paper. The the reference surface you need. It makes a
7” handle houses a stiff 1/16” thick 6” high-contrast background to show
blade. Brass knurled knob. where parts contact, or for clean,
The premium 10” Sliding Bevel is lightly scribed layout marks. Washes
made of aluminum. It has a lock- off with alcohol or lacquer thinner.
ing screw in the handle’s end, so the sliding bevel
lays flat on either side. Made in Japan. 461531 Machinist’s Dye 4 oz $20.99
461565 Machinist’s Dye11.5 oz Aerosol $38.99
461204 Small Shinwa Sliding Bevel $13.99
461202 10” Shinwa Sliding Bevel $28.99
®
OPENS TO 12” VERITAS TRANSFER
SCRIBE
SLIDING T-BEVEL This excellent scrib-
Crown sliding bevel
ing tool lets you fit mouldings,
locks & hold angles from 0° to back-splash and cabinet trim to out-of-
180°. Hardwood stock has brass flat ceilings and walls. It helps cope moulding cor-
end caps. 9” steel bevel locks with ners perfectly and makes clean, tight-fitting log
recessed lever. joinery. The double-ended steel stylus has a blunt
461118 9” Sliding T-Bevel $38.99 offset tracing point & a sharp compass point. 2 lev-
eling vials assure accuracy. Cast aluminum & brass.
®
VERITAS DOVETAIL MARKERS 467014 Veritas Transfer Scribe $159.99
®
Anodized aluminum dovetail mark-
®
ers. One with 1:6 ratio & one with 1:8. VERITAS SADDLE SQUARE
177129 Veritas Dovetail Markers pair $17.99 These black anodized aluminum
®
squares wrap around 90° corners,
®
VERITAS STEEL STRAIGHTEDGE letting a pencil work nearly as pre-
This fine economical straight- cisely as a knife. The Small Saddle
edge is accurate enough to check Square is 2” wide x 1-1/4” x 2-1/4”. Large
surfaces and set up woodworking Square is 1-1/2” wide x 1-3/8” x 3-3/8”, perfect for
machines. The edges are milled to 1-1/2” WIDE
1/4” THICK measuring a 2 x 4.
within 0.001” over its’ length. 24” LONG 467030 Small Veritas Saddle Square $19.99
®
®
®
177033 24” Veritas Steel Straightedge $84.99 177019 Large Veritas Saddle Square $23.99
®
VERITAS BEAM COMPASS HEADS VERITAS SET-UP BLOCKS
®
To Precisely lay out & scribe Useful in positioning table saw jigs, drill press
components & router fences
Clearly marked blocks
span 1/16” to 4-11/16” in
These elegant black anodized clamp 1/16ths. Includes a 1” x 2” x
heads with brass lock knobs clamp on material 3” steel block (accurate to within
5/8” to 3/4” thick. One point is eccentrically 0.0002”); five 3/4” x 2” alumi-
ground, providing 1/8” micro-adjustment range. num blocks 1/16”, 1/8”, 1/4”,
Pins can be replaced with a pencil (included). In- 1/2” & 3/4” thick (accurate to within
cludes snap-closed storage case. 0.002”); & a plastic case with fitted foam insert.
®
467025 Veritas Beam Compass Heads $74.99 177025 Veritas Set-Up Blocks $68.99
®
20 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748