Page 33 - Highland Woodworking Tool Catalog

Spokeshaves & Drawknives

®
TRAVISHER VERITAS LOW ANGLE SPOKESHAVE
This 3” wide convex spokeshave is used for
chair seat shaping after the adze, scorp & compass
plane have roughed in & refined the form. The Based on a 19th century wooden design.
handles continue the blade’s curve, rising out of This small spokeshave’s easily adjusted revers-
the way of adjacent surfaces for unobstructed reach ible toe piece handles flat & concave work. 10-
into deep hollows. 4-1/2” sole radius. 1/2” body is solid die-cast aluminum, giving it
471144 Travisher $119.99 nice heft. PM-V11 powdered metal alloy 2” x 1/8”
blade sharpens & holds a keen edge nicely, even
B compared to A2 steel.
A
177135 Low Angle Spokeshave $99.99
CONCAVE & CONVEX SPOKESHAVES 177136 2” Repl. Blade (PM-V11) $33.99
These 10” spokeshaves excel at planing curved
surfaces along the grain. Both have 2-3/4” curva- VERITAS CORNERING TOOLS
ture radius & 2-1/16” wide irons. The lightest & most casual tools we know
A
433908 Convex Spokeshave $42.99 of for rounding over edges quickly. Tools
(for concave cuts) cut on both push or pull stroke & have 2
433909 Convex Repl. Cutter $19.99 cutting radii: 1/16 & 1/8”, and 3/16 & 1/4”.
433910 Concave Spokeshave $42.99
B
(for convex cuts) Includes resharpening tool.
433911 Concave Repl. Cutter $16.99 436003 Cornering Tools pair $49.99
GALBERT DRAWSHARP by BenchCrafted, USA
Peter Galbert’s honing jig design yields consistent, repeatable & sharp results!
Referencing the drawknife’s spine, this anodized aluminum jig has 2 posts that adjust to
guide at the set honing angle with 1 for the bevel & the other for the back of the blade. A
clear scale lets you note the setting. An acetal wear plate & nylon bumpers glide
smoothly. Abrasive sleeves, (a fine diamond surface & a finer abrasive paper), slip
onto posts. Comes in a metal can with enough abrasives for many sharpenings.
135201 Galbert Drawsharp $104.00
BARR DRAWKNIFE BARR CHAIRMAKER’S
Blade is hand-forged wear- DRAWKNIFE
resistant steel with a gently This hand-forged tool has a hollow ground,
radiused edge & a small back bevel to maximize razor sharp, 6-3/8” cutting edge. Cap nuts se-
control & minimize tear-out. The nicely shaped cure the 5-1/4” long hardwood handles on full
hardwood handles are bent to a 20° angle for effi- length threaded tangs. 1 lb. OAL 13”.
cient, comfortable use. 6” x 1/2” blade . OAL 15”. Standard has a 1/4” x 1-1/4” blade with a 25°
129653 6” Carver’s Drawknife $151.00 bevel & handles that are slightly bent up. Slim has
129678 Small Leather Blade Guard $39.00 a 1/4” x 7/8” blade with a 25° bevel for tight cuts.
BARR 129658 Std. Chairmaker’s Drawknife $151.00
CHAIRMAKER’S SCORPS 129659 Slim Chairmaker’s Drawknife $163.00
Also called an inshave, this tool MADE Please expect lengthy
has the perfect sweep & handle angles for IN USA delays for Barr Tools.
rapid & efficient wood shaving on chair seats.
471139 4” Dunbar Style Scorp $163.00 MADE IN USA FLEXCUT DRAWKNIVES
129650 6-1/2” Chairmaker's Scorp $163.00
With
Leather
Blade Sheaths
From the Mueller forge in Austria These beautiful drawknives are made of high
MUELLER DRAWKNIFE quality spring steel, sharpened & polished to a ra-
This drawknife has a slight belly to zor edge. Flexcut’s sculpted handles are set in the
the leading edge & a gentle sweep in the plane of the blade & splayed for comfortable pull-
horizontal axis giving better control for pinpoint ing. Perfect for roughing in carving blanks, or shav-
stock removal. Cutting edge approx. 9-1/2”. Blade ing furniture parts down to rough size.
width 1”. Painted handles are 4”. OAL 16-1/2”. 125198 Flexcut 3” Straight Drawknife $44.99
179423 Mueller 9-1/2” Curved Drawknife $62.00 125050 Flexcut 5” Curved Drawknife $57.99
NAREX 6” CARVER’S DRAWKNIFE
This 6” drawknife is used for small shaping jobs - shaping chair
spindles to roughing carving blocks & spoon handles. The straight Includes protective
chrome vanadium steel blade is 1/8” thick x 9/16” wide x 6” long & leather sheath
hardened to Rc 57. Czech Beech handles are 4” long & 1” in dia. at
the widest point. Honing required before use. 147112 Narex Carver’s Drawknife $93.99
NAREX DRAWKNIVES
These Narex drawknives have 9-1/2” long cutting edges, forged
from chrome steel & hardened to Rc 55. The blades are approx.
5/32” thick by 1-9/16” wide & are offset about 3/4” from the handles.
They are good for general roughing 147114 Narex Straight Drawknife (OAL 17-1/2”) $99.99
work and bark removal. 147117 Narex Curved Drawknife (OAL 18-1/2”) $106.99

GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 33