Page 30 - Highland Woodworking Tool Catalog

Hand Saws THOMAS FLINN & CO.
From the UK’s premium saw
Bad Axe hand saws are made in USA manufacturer, iconic handsaw
by military veterans employed by a brands that fine woodworkers
veteran owned business & backed by a have known & cherished for generations.
100% lifetime guarantee against all defects in PAX 22”
materials & workmanship.
AUTHOR’S PANEL
BEST OVERALL
BEST OVERALL
C H O I C E SAWS
These western-style saws have a hand-shaped &
sharpened fine alloy-steel blade secured with sol-
id brass screws. 22” cutting edge has a breasted
BAD AXE toothline (mild convex profile) to improve cutting
HAND SAWS efficiency. Blade is taper ground over its height,
Based on a 19th century design, these (5-1/2” to 2-1/4”), to reduce binding. Classic shape,
handsome saws have classic, solid cherry steamed beechwood handle has 2-tone durable
handles & solid steel backs with a traditional gloss stain & handsome brass medallion. OAL 25”.
folded design, allowing you to re-tension the
Swedish high-carbon spring steel blade if 159517 Pax 22” Rip Saw (5 ppi/4.5 tpi) $144.99
necessary. Polished brass nuts secure the blade 159518 Pax 22” Crosscut Saw $144.99

(11 ppi/10 tpi)
& are beautiful accents. Limited availability. 159519 Pax 22” Crosscut Saw $144.99
The 12“ Stiletto Dovetail Saw has a long tooth- (8 ppi/7 tpi)
line with a 15 ppi rip blade. Cutting depth 1-3/4”.
The 12” Hybrid Saw, named ‘Best Overall’ by LYNX DOVETAIL
FWW, will handle all your joinery needs. 14 ppi & TENON SAWS
hybrid tooth filing. Depth of cut is 2-7/16”. The rip cut teeth on
The 16” Tenon Saw has a 12 ppi hybrid tooth these fine joinery saws
design, handling both ripping tenon cheeks & make clean efficient cuts. Alloy spring steel saw
crosscutting tenon shoulders. Depth of cut is 4”. plates are securely held with a solid brass spine.
Full sized, classic beech handles are a deep ma-
135701 Bad Axe 12” Stilleto Dovetail $295.00 hogany tone with brass plated screw buttons.
Saw .018” plate thickness, OAL 17”, .95 lb
135702 Bad Axe 12” Hybrid Saw $295.00 456309 Lynx 8” Dovetail Saw $92.99
.02” plate thickness, OAL 17”, 1.05 lb (20 tpi, depth of cut 2-1/4”, OAL 13”)
135703 Bad Axe 16” Tenon Saw $340.00 456308 Lynx 12” Tenon Saw $96.99
.025” plate thickness, OAL 21-1/2”, 1.85 lb (12 tpi, depth of cut 3-1/8”, OAL 17”)
LYNX ONE MAN CROSSCUT SAW
BAD AXE
D8 PANEL SAWS OAL 27-1/4” When you’re flying solo with some big logs to saw
1.6 lb
Rc 49-52
The D8 is made from 1095 spring steel sawplate. The 1/16” thick blade has large aggressive teeth
The plate is hammer-tensioned, taper ground wet cut in the Great American pattern. Each 1” wide
& worked to strategic thicknesses at different loca- tooth is made of 3 small teeth (3ppi). A 1”
tions, creating a very stiff efficient blade that moves deep gullet between groupings accomodates dust
more easily within the kerf. Plate depth is 7-1/2” at during the cut. 3-1/2” run of small teeth (3ppi) at
heel & 2-5/8” at toe. Patterned after the elegant the blade’s toe helps start cuts. Primary beech han-
handles of Disston panel saws (1887-96), the han- dle has a classic western shape & 6” auxiliary beech
dles are durable quartersawn hickory with an oil & handle attaches at the toe. Max. blade width is
wax finish. They’re securely fastened to the 24” 5-1/2”. The 4’ saw has a 45-1/2” cutting length &
blade with brass slotted nuts & a deep dish decora- 52-3/4” OAL. The 3’ saw has a 35” cutting length
tive medallion. & 40-3/16” OAL. The 3’ saw is also available with
135706 Bad Axe 6ppi Rip Panel Saw $415.00 the faster cutting Champion Tooth pattern. This
is a 1” wide cutting tooth made of 2 small teeth
135707 Bad Axe 9ppi Crosscut Panel Saw $415.00
that is separated by a large gullet from a 1/2” wide
®
VERITAS DOVETAIL, CROSSCUT raker tooth made of 2 small teeth.
& CARCASS SAWS 159581 3’ Lynx One Man Crosscut Saw $164.99
Handsome, balanced, smooth 159587 3’ Lynx One Man Crosscut Saw $184.99
cutting handsaws (Champion Tooth)
blend modern 159594 4’ Lynx One Man Crosscut Saw $189.99
materials with a ALL Lynx 3’ saws ship within 48 lower states for a
traditional design $15 surcharge. ALL Lynx 4’ & 5’ saws ship within
These nicely made saws have a high carbon steel 48 lower states for a $30 surcharge.
blade with a tooth set of .003” per side. The strong, LYNX TWO MAN CROSSCUT LOG SAWS
stiff spine is high-pressure injected molded resin Tandem crosscut saws have 1/16” thick steel
reinforced with stainless steel powder & glass fibers. blades. Large aggressive hammer set teeth are
Solid hardwood handle. Crosscut & Dovetail saws hand sharpened & filed to cut on the pull
have 9-1/4”, .020” thick blades, 1-9/16” depth of
cut & 14” OAL. Carcass saws have 11”, .020” thick
blades, 2-3/8” cutting depth & 16-3/8” OAL. stroke in both directions. 1.5 tpi plain tooth pat-
®
177059 Veritas Dovetail Saw $99.99 tern. 5-1/2” blade depth. 13-3/4” x 1-3/16” large
(14 tpi, rip filed) beech handles. Use a saw twice as long as the stock
®
177060 Veritas Fine-Cut Dovetail Saw $99.99 you are sawing for efficient cutting.
(20 tpi, rip filed)
177061 Veritas Small Crosscut Saw $99.99 159582 Lynx 4’ Two Man Crosscut Saw $164.99
®
(16 tpi, crosscut) (Cutting length 43-5/16”. OAL 50-3/8”)
177066 V. Crosscut Carcass Saw (14 tpi) $109.99 159583 Lynx 5’ Two Man Crosscut Saw $209.99
177065 V. Rip Carcass Saw (12 tpi) $109.99 (Cutting length 55-1/8”. OAL 62-3/16”)
30 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748