Page 27 - highland-woodworking-earlyfall2022-catalog

SHINWA COMBINATION SQUARE Marking & Measuring
Precise combination 90° & 45°
stainless steel try square. 1/16ths SHINWA SADDLE SQUARE & MITER
grads. Miter side measures verti- This metric aluminum miter square carries
cal distance. 4” x 6-1/4”. layout lines around corners at 45° & 90°.
60mm wide faces have cutouts for registering
466405 Shinwa Combination Square $23.99
marks inside the square’s body. 6-5/8” long.
®
VERITAS SADDLE SQUARE 146801 Shinwa Square & Miter $19.99 $22.99
Black anodized aluminum squares wrap LUFKIN 6’ FOLDING HOOK RULE
around 90° corners, letting a pencil work This version of Tage Frid’s favorite rule has 1/16ths
nearly as precisely as a knife. Small is 2” scale. A brass 6” slide-out
wide x 1-1/4” x 2-1/4”. Large is 1-1/2” rule measures tight spaces. A fold-
wide x 1-3/8” x 3-3/8”, perfect for measuring a 2 x 4. out brass hook snugs the rule
®
467030 Small Veritas Saddle Square $19.99 on the end of a board.
®
177019 Large Veritas Saddle Square $23.99 161401 Lufkin Folding Hook Rule $31.99
3D SQUARES Excel as temporary jigs & fixtures for keeping carcasses aligned during assembly.
5/32” thick squares are milled straight & square to within .002” over their length. Aluminum is
smooth & burr free. 6” x 1-1/16” legs and clamp surfaces have six 3/16” holes for jig
attachment or temporary fastening. 163608 3D Squares (Pack of 2) $29.99
PRECISION ADJUSTABLE SQUARES
Quality precision squares with machined, legible chrome blades
These precision squares have meticulously ground cast iron bodies with
a textured matte black finish & satin-chrome blades etched in 1/16ths,
1/8ths, 1/32nds & 1/64ths. Knurled thumb wheels are comfortably sized.
The 12” Combination Square’s head is 4-1/2” long x 3-3/4” high
with 90° & 45° sides, bubble level & screw-in scribe pin. The 4” Double
Square’s head is 2-1/2” long x 1” wide x 1/2” thick. The 6” Double
Square (only available in a set) has a 4” x 1-1/8” x 5/8” thick head. The
6” Combination Square Set has a 90°/45° combination head, 2-7/8” long x 1-3/8” high, with bubble level
& screw-in scribe pin & a 3” x 2-1/2” center head (cen-
ters up to 2-5/8”). The 12” Combination Square Set 169301 12” Combination Square $32.99
has 3 heads: the combination, a center-finder with 169303 4” Double Square (no case) $12.99
$26.99
169388
4” & 6” Double Square Set
2-1/2” sides, & a 7” long protractor with 1° grads. 169351 6” Combination Square Set $36.99
Combination square & sets have fitted plastic case. 169302 12” Combination Square Set $73.99
Skowhegan Wooden Rule MADE iGAGING LAYOUT SQUARES
Continuing the tradition started in IN USA These precision 12” & 7” layout squares are
1869 at Lufkin Rule, these high quality rules are laser cut from a single block of aluminum
made from a single piece of select hard maple & on state-of-the-art CNC equipment making
bound with inlaid brass caps. Markings are engraved them accurate to within 2/1000th of an inch.
& filled in black, not printed. Clear protective finish. Both squares have 2mm blades marked in
HEIRLOOM TIMELINE GROWTH RULE 1/16th” increments along the full length
Create a permanent record of your child’s growth. outside edge & 1/32” on the inside edge. For
The 3-1/2” x 78” rule is graduated from 4” to angle finding, each blade includes clearly
78” (6’ 6”) in 1/8”. Grads are about 1-1/8” wide, marked, laser etched, mitre angles
leaving 2-3/8” for notations. The back is blank. that start at 5° & scale up to 60° in
127211 Heirloom Timeline Rule $99.99 5° increments. When it comes to marking, both
SKOWHEGAN FLAT BENCH RULES blades have 3 rows of generously sized .07mm pen-
Flat Bench Rules are 1-1/2” wide, 1/4” cil holes along with a center finder rule that runs
thick & graduated in 1/8ths” & 1/16ths” along the outside edge. The base of the square mea-
on both sides & both edges, (L to R on sures 1” tall & includes 2 magnets (handy for machine
the top & R to 127202 24” long $22.50 setup), 1/4” & 3/8” offsets for marking joinery, and a
L on the bot- 127203 36” long $28.50 useful 45° cut-out. Also available as a 2 square set.
tom edge). 169393 7” iGaging Square $34.99
The rule end 127204 48” long $31.50 169394 12” iGaging Square $46.99
has a hole for 127205+ 60” long $38.50 169395 iGaging 2 Square Set $79.99
hanging. 127206 72” long $44.50
*
+ ships within lower 48 for $8 surcharge in addition to std. shipping. GENERAL 6” PRECISION
FLEXIBLE RULES
* ships within lower 48 for $10 surcharge in addition to std. shipping. Steel pocket rules
INCRA 10” METRIC/DECIMAL RULE are etched in 64ths grads. A
This unique rule has a series of narrow removeable pocket clip slides on .020” thick blade.
slots & tiny holes that locate your mechani- 463014 Flexible Precision Rule 1/4” wide $2.99
cal pencil lead or the tip of your scratch awl 463015 Flexible Precision Rule 1/2” wide $3.99
at exactly the point you choose. Pin one end
with the point of an awl, to use as a beam STEEL ENGINEER’S SQUARES
These durable steel engineer’s squares
compass for marking precise curves. have reliable accuracy inside and out.
485380 Incra 10” Metric/Decimal Rule $23.99 Perfect for joinery & accurate calibra-
®
VERITAS STEEL STRAIGHTEDGE tion of machines & jigs. Includes pro-
This fine economical straightedge is accu- tective case.
rate enough to check surfaces & set up wood- 169311 2” Steel Engineer Square $9.99
working machines. Edges are milled to within 0.001” 169312 4” Steel Engineer Square $12.99
over their length. 1-1/2” wide x 1/4” thick. 169313 6” Steel Engineer Square $16.99
®
177033 24” Veritas Steel Straightedge $84.99 169314 Set of 3 Steel Engineer Squares $38.99
GO TO HIGHLANDWOODWORKING.COM TO SEE OUR COMPLETE PRODUCT LINE 25