Page 26 - highland-woodworking-earlyfall2022-catalog

Marking & Measuring iGAGING EZ-CHECK DIGITAL
HEIGHT GAUGE Set depth of cuts on your
ANGLE CUBE DIGITAL GAUGE tablesaw, router & jointer with digital accuracy.
Adjust & set tilt angles of saw blades, A large LCD display shows fraction- Capacity
machine tables & fences to within 1/20° al inches (down to 1/648”), decimal 0 to 5”
An internal sensor measures absolute inches (accurate to .0015”) & milli-
level. LCD characters are 1/2” high & auto- meters (accurate to .03mm). Strong
matically invert when unit is upside down. Magnets magnets in the anodized aluminum
on 3 sides give placement flexibility. Hold function base steady it on cast iron surfaces &
locks in reading. 2-5/32” square x 1-3/16” thick. hold it horizontally on a steel Includes
169310 Angle Cube Digital Gauge $39.99 fence. Caliper foot & rule are Battery
(includes 9V battery) hardened stainless steel with 1/4”, 3/8” & 1/2” steps
& 1/4” hardened scriber. Zero button. Auto-shutoff.
DIGITAL PROTRACTOR & RULES
Digital protractor bevel squares dis- Uses 169397 iGaging Digital Height Gauge $49.99
play 0 to 360° to the nearest 3V battery
1/10th°. Clear 1/2” high digi- ONEWAY MULTI-GAUGE
A heavy, precisely machined cast iron
tal display reverses to read upside down. 1-1/8” wide base lets this dial indicator work on
steel legs have etched grads in 1/16, 1/32, 1/64’s & steel & cast aluminum tool surfaces. 1-1/4” thick
mm. The 10” leg has 8” of grads & the 14” has 12” of frame is an accurate square for fence & blade set-up.
grads. A knurled locking knob secures legs & a hold
button displays your reading even if you move a leg. 150101 Oneway Multi-Gauge Dial Indicator $109.99
169336 10” Digital Protractor & Rule $21.99 MARKING & MORTISE GAUGE
169363 14” Digital Protractor & Rule $24.99 Combination gauge has a fixed
spur & an adjustable spur
HAMILTON 4” CHERRY with brass pull slide for
MARKING GAUGE laying out mortises on one side. OAL 7-1/2”
This handsome gauge is made from The other has a single spur for regular marking.
wild black-cherry with hand-rubbed Knurled brass knob locks headstock.
oil/varnish finish & brass inlays. The 461114 Marking & Mortise Gauge $56.99
3” wide, low profile fence slides on the 4” sliding
dovetail beam & rests 3/8” below the blade, letting DELUXE MARKING & MORTISE GAUGE
Crown’s deluxe gauge has a thumbscrew
you scribe lines as it lays flat. Cryogenically heat OAL operated slide for precise
7-1/2”
treated 1095 spring steel blade is hand honed to setting of mortise width.
8000X. (RC60-62) The fingernail grind shape
scribes in both directions & pulls the fence tight 461116 Deluxe Marking & Mortise Gauge $92.99
against stock. 2-7/8” max. fence to cutter setting. CUTTING GAUGE
434001 Hamilton Marking Gauge $75.00 Crown’s beech cutting gauge is
used for incising clean lines across the
VERITAS DOVETAIL MARKERS grain, when laying out dovetails & other joints. It ac-
Anodized aluminum dovetail mark- tually cuts the visible shoulder of the joint before the
ers with 1:6 ratio for softwood & 1:8 for hardwood. saw is used for stock removal. OAL 8”.
177129 Veritas Dovetail Markers (pair) $16.99 461113 Cutting Gauge $28.99
®
®
VERITAS WHEEL MARKING GAUGES VERITAS IMPROVED
The hardened steel cut- MICRO-ADJUSTING WHEEL
ting wheel on these gauges starts MARKING GAUGE
& marks smoothly, with no worry about The smooth stainless-steel rod’s inner shaft has
attack angle or tearing during cross-grain marking. fine internal threads, to adjust the hardened steel
The inside bevel pulls the gauge tight to stock & re- wheel cutter within 1/4”. Secure the setting with
sists following grain. Unmarked bar. the locking knurled brass knob. The rod passes off
467010 Veritas Wheel Marking Gauge $44.99 center through the 1-13/16” dia. brass face of the
®
177028 Micro-Adj. Wheel Marking Gauge $49.99 head, creating more surface area to square up to
177029 Graduated Micro-Adj. Gauge $53.99 stock & stopping the gauge from rolling away. The
®
VERITAS DUAL MARKING GAUGE wheel cutter works better than pin scoring; you
This gauge has twin rods to don’t have to tilt the gauge to scribe a chatter-free
transfer & scribe 2 different set- line & the cutter avoids following wood grain. The
tings at a time. The hardened cut- OAL 7-1/4” single sided bevel wheel pulls the gauge snug to
ting wheels have opposing bevels that are on the your stock. The rod accurately transfers depth di-
waste side of a cut. Internal O-ring & locking thumb- mensions. The cutter & rod retract into the head,
screw allows easy adjustments. Scribe up to 5-3/4” letting the gauge sit upright. The stainless steel rod is
wide. Cutters recess into the brass face for storage. available to upgrade earlier models of the Gauges.*
®
177069 Veritas Dual Marking Gauge $69.99 177138 Veritas Improved Micro-Adj. $73.99
®
177070 Outside Repl. Cutter (Dual Gauge) $6.99 Wheel Marking Gauge
®
177071 Inside Repl. Cutter (Dual Gauge) $6.99 177139 Veritas Upgrade Rod* $39.99
®
CZECK EDGE RULER STOP MADE VERITAS SET-UP BLOCKS
IN
Makes almost any size ruler USA Useful in positioning table saw jigs,
capable of repeatable, accurate drill press components & router fences
Clearly marked blocks span 1/16”
measurements from a fixed edge.
Non-marring precision machined jaw to 4-11/16” in 1/16” increments. In-
faces clamp on a ruler with a knurled brass cludes a 1” x 2” x 3” steel block
knob. 1-1/4” max. jaw width. 1/2” x 1” alu- (accurate to within 0.0002”); five
minum aircraft grade body & jaws, 1/4” dia. 3/4” x 2” aluminum blocks 1/16”,
hard steel guide rods & stainless steel lead screw. 1/8”, 1/4”, 1/2” & 3/4” thick (accurate to within
455403 Ruler Stop OAL 3-7/8” $32.99 0.002”); and a plastic case with fitted foam insert.
®
177025 Veritas Set-Up Blocks $68.99
24 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748