Page 25 - highland-woodworking-earlyfall2022-catalog

FOR OUR DIGITALLY INCLINED WOODWORKERS! Marking & Measuring
6” FRACTIONAL DIGITAL CALIPER
With Plastic Case WOODWORKERS
STAINLESS STEEL
The 5/8” high LCD screen is DIAL CALIPER
easy to read with clear 1/2” high numbers & This fine machinist-qual-
1/4” high fractions. Touch a button to scroll ity caliper is calibrated in Our most
fractions, (to nearest 1/128), decimals or mm or re- 64ths”. The 1-3/8” dia. face popular caliper!
set to zero. Bar has 1/10ths & mm grads. Stainless is easy to read with clear di- Includes plastic case
visions. 1/100ths” inner scale
steel with high impact sensing head. Auto-shut off.
is for machine work & serves as a conversion table.
168310 Fractional Digital Caliper $29.99 $36.99
465008 6” Woodworkers Dial Caliper $36.99
Precisely lay out VERITAS BEAM COMPASS HEADS
®
& scribe These elegant black anodized clamp heads with brass lock knobs clamp on mate-
arcs & circles. rial 5/8” to 3/4” thick. One point is eccentrically ground, providing 1/8” micro-ad-
justment range. Either pin can be replaced with a pencil (included). Includes snap-closed
storage case. 467025 Veritas Beam Compass Heads $74.99
®
INCRA RULES PROTRACTOR from Shenandoah Tool Works
This protractor makes ac- BIRDCAGE AWL
curate layout & angle mea- The awl’s shaft is hand forged & twisted from
surement easy. Micro-fine 01 steel, (RC 62). The sharp tip starts holes which the
marking holes in 1/2° in- square shank then widens. The comfortable, beauti-
crements precisely place fully turned 1-3/4” dia. Padauk handle has a finger
the tip of your .5mm lead grip enabling a firm grasp & the use of strong pressure.
pencil or marking awl. It works flat, or with its T-bar 455423 Birdcage Awl $54.99
registered against an edge. .5mm Mechanical Pencil
is ideal for use with layout tools. Includes extra leads. NAREX SCRATCH AWLS
Narex’s awls have 6mm (1/4”) x 100mm (3-15/16”)
485384 Incra Rules Protractor $38.99 chrome-vanadium steel shafts & stained beech han-
141032 Incra Mechanical Marking Pencil $1.00
dles. OAL 164mm (6-/16”). The Round Awl’s round
TRADITIONAL STEEL PENCIL COMPASSES blade tapers over the last 1-1/2” to a sharp point. The
HD models are sturdy square steel & use a Square Awl’s round shaft is ground to a square taper
standard pencil. 18” & 24” models have flat over the last 2” & then sharpened to a point. Great
steel legs & a steel point on the pencil side to for reaming starter holes for larger screws.
use as a divider. 146090 Narex Round Awl $10.99
310311 6” HD Compass $15.99 146089 Narex Square Awl $10.99
310312 8” HD Compass $18.99
310313 12” HD Compass $21.99 JAPANESE GARNISH AWLS
310317 18” Compass $19.99 Steel blades, exceptionally
310318 24” Compass $24.99 heavy bolsters, & white oak handles make these awls
sturdy enough for heavy pressure or mallet blows.
LONG NOSED
PATTERN MARKER 476403 Large Garnish Awl (4-1/2” long) $15.99
A great solution for tricky layout problems. 476404 Small Garnish Awl (3-1/2” long) $9.99
This permanent & waterproof black marker has a
1-1/8” long fine point tip & a wide tip. PROCARPENTER TAPE MEASURES
FastCap tape measures have a handy
167276 Fastcap Long Nosed Pattern Marker $7.99
erasable writing surface on the case, to
HOCK MARKING KNIVES jot down notes. The steel tape is
High carbon steel unhandled 30% thicker than other tape
marking knives are beveled on only one side, with the blades for longer reach. A standard slide
spear pointed for either right or left handed use. lock & a “hold” button temporarily stop
122535 3/4” x 7” Hock Marking Knife $33.00 the tape in position. The sturdy hook has
122536 1/4” x 7” Hock Marking Knife $30.00 4 rivets. A rubber boot with an integral
DOUBLE EDGED STRIKING KNIFE pencil sharpener armors the case & makes
The 55° double beveled knife is for right or it easier to grip. Clear 1/16” or 1mm in-
left-hand use & marks in both directions. The crements. Story Pole Tapes have grads on the top
flat back lets the knife edge lie flush on your edge & an erasable writing area below. Inch/Metric
straight edge. Hardwood handle. 6-3/8”. versions have inch grads on the top & metric grads
169334 Double Edged Striking Knife $9.99 on the bottom. Revolutionary FlatBack Tapes eas-
ily measure curved workpieces. One is the Story
Pole style, the other is an Inch/Metric with a nar-
NAREX SPEAR POINT MARKING KNIFE row writing margin on both edges. A Speed Clip
Stained hornbeam handle. 1-7/16” x 3/8” x 3/64” hooks on your belt & securely holds your tape &
thick Manganese Vanadium Steel (Rc 61) blade is pencil, and prevents damage from the tape’s clip.
beveled on both sides so you can use it on either the 167238 16’ Standard Tape $11.50
left or right side of your rule. OAL approx. 6-11/16”. 167214 16’ Story Pole Tape $11.50
148133 Spear Point Marking Knife $27.99 167215 16’ L & R Reading Tape $11.50
167236 16’ Inch & Metric Tape $11.50
JAPANESE MARKING KNIFE This simple 167242 16’ FlatBack Story Pole Tape $11.50
tool is remarkably comfortable & well-balanced. 167243 16’ FlatBack Inch/Metric Tape $11.50
The laminated steel blade is beveled on just one (graduations end shy of tape’s edge)
side, so the cutting edge lies flush against a square, 167311 25’ Standard Tape $16.50
& stands vertically for clean marking. The back of 167314 25’ Story Pole Tape $16.50
the handle is hollowed to speed the honing pro- 167313 25’ L & R Reading Tape $16.50
cess, & is a nice fit for the right thumb. 167312 25’ Inch & Metric Tape $16.50
466401 Japanese Marking Knife $17.99 167239 Speed Clip $2.25
GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 23