Page 68 - Highland Woodworking Tool Catalog

Safety Equipment

PELTOR KREG TRUE-FLEX
JUNIOR SIZED EARMUFFS FEATHERBOARDS
These comfortable junior earmuffs These fit into any
have an adjustable stainless steel padded 3/8” x 3/4” miter slot
headband & liquid foam ear cushions. Black. on your machines & 6-1/2” x 7-1/4”
Fit toddlers to petite adults. 22dB noise reduction. include hardware for x 5/8” thick
156571 Peltor Junior Sized Earmuffs $22.99 fitting T-slots. Tough 4” plastic fingers are 2-3/8”
HEDGEHOG SPIRAL FEATHERBOARD deep. Reversible for use with both feed directions.
The unique spiral 124309 Kreg True-FLEX Featherboard $24.99
shape & a single pivot 124310 True-FLEX Featherboards (pair) $39.99
point expedite & sim- PUSH BLOCK
plify setup. It can be Recommended for work with
reconfigured to use on small stock or when surface-jointing
either side of fence and lets you set & reset quickly Soft, long-wearing foam pad securely
to the changing width of your board. grips stock. Canted handles make it easy to work
176731 Hedgehog Featherboard $39.99 next to a fence without barking your knuckles.
431019 Push Blocks (pair, 3” x 6”) $8.99
V PUSH STICKS
Shoe-style push sticks let you easily apply downward pressure as you push stock. 6-1/4” bearing
length forward of heel notch. A “V” groove in the sole snugs the stick on a corner of a
board. 8-1/2” x 6” tall. 7/16” thick stiff plastic resists shattering if cut. Hole for hanging.
168003 V Push Sticks (pair) $8.50
MAGSWITCH FEATHERBOARDS
Rip, route, shape, joint & drill with more safety & precision!
A quick turn of a knob aligns a powerful magnet, gripping
your cast iron tool surfaces with incredible force. You
get fast setups & increased placement options since
you’re not bound by a machine’s miter slots.
The Magswitch Starter Kit has a universal base, 2 removable Mag Jig 150
clamps & a reversible low profile featherboard attachment for L & R sided feeds. Mag
clamps can be removed to use in your homemade fixtures & fences.
The heavy, 1” thick Magswitch Pro Table Featherboard is for table saw use with
the rip fence right of the blade or shaper tables feeding stock from R to L.
The Vertical Featherboard Attachment works with the Starter Kit & Pro Table Featherboard. It
lets you apply downward pressure as you feed your 169520 Magswitch Starter Kit $120.99
stock. Use the included risers to stack it on top to 169502 Magswitch Pro Table $80.99
add horizontal pressure with thicker material. 169518 Magswitch Vertical Attach. $23.99

GRR-RIPPER ADVANCED 3D PUSH BLOCK SYSTEM
A stock control system engineered to helpyou cut & route safely &
accurately on your tablesaw & router.
The Micro Jig GRR-Ripper Advanced Push Block provides a safe and
reliable method to grip, hold & feed your stock across your table-
saw, router, jointer or bandsaw. Its large guide handle ensures your
hand is well clear of the blade. The jig’s design lets you set up for rip-
ping stock of different thickness, guiding both your keeper piece & cut
off piece for increased control. For the milling of short workpieces, this jig is
simply indispensable for unmatched safety & control. The push block has
1/2” & 1/4” spacer legs for spanning your material & a stabilizing plate for use with narrow stock.
An optional 1/8” Side Leg lets you handle even thinner stock.
Other optional accessories increase the range and safety of
controlling stock even further.
The Gravity Heel Kit has 5 replaceable “heels” that can
retract mid-board, but will drop down to hook the end of a workpiece.
They’re made of a plastic that can be cut or milled to help prevent tearout
at the end of your cut.
The Handle Bridge Kit improves handle
positioning & pressure distribution for safe
stock holding. 169583 GRR-Ripper Advanced $84.99
The Deflector/Con- 3D Push Block
nector securely con- 169587 1/8” GRR-Ripper Side Leg $16.99
nects 2 GRR-Rippers 169598 Gravity Heel Kit $16.99
as it covers the blade 169584 Handle Bridge Kit $15.99
or bit, acting as a chip 169585 Deflector/Connector $13.99
guard. (NOTE: The Handle Bridge Kit is required to in- 169578 GRR-Ripper Advanced $139.99
stall the Deflector/Connector.) 3D Push Block Complete System
(Includes all 5 Grr-Ripper Stock Control jigs above)
MICRO JIG GRR-RIP BLOCK
Use on your table saws, jointers, bandsaws & router tables.
This push block has the Grr-ripper non-slip bottom plus the unique Gravity
9” x 3-1/2” Heels for extra versatility and control. Drop-down heel hooks are there when you
need them and instantly retract when you don’t. 169597 Micro Jig GRR-Rip Block $34.99
68 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748