Page 47 - Highland Woodworking Tool Catalog

AUTOMATIC CENTER PUNCHES Assembly Tools
These indispensable
tools have an internal SELF-CENTERING
trip hammer for one handed use. Use them to DOWELING JIG
accurately start drilled holes. Rotate the cap to Centers 1/4”, 5/16”, 3/8”,
adjust impact pressure; light pressure for wood to 7/16” & 1/2” holes on the
heavy pressure for cast iron. The self-centering edge of any board 1/2” to 2” thick.
model is perfect to use when installing hinges. Use standard-length twist or bradpoint bits.
461549 Starrett Center Punch $54.99 477501 Self-Centering Jig $59.99
461548 Starrett Self-Centering Punch $59.99
DOWL-IT 2500
HEAVY DUTY SCREWDRIVER SET You can drill several side-
Forged from high carbon steel, by-side holes without mov-
these brutes have the blade ing this self-centering jig. 4
running the tool’s threaded guide holes accept screw-in
full length with drill bushings, (includes 2 each of 1/4”,
the wood handle cheeks 5/16” & 3/8”). Space holes at 3/4”,
riveted onto the grip. Rough & clunky 1-1/4”, 2” or 2-3/4” on center.
in fit & finish, they’re not likely to bend if used as a 477507 Dowl-It 2500 Jig $69.99
pry bar. Roughly ground tips allow you to grind Replacement Bushings $7.99 each
them to suit your needs. 6”, 8”, 10” & 12”. 477504 477505 477506
169105 Set of 4 HD Screwdrivers $39.99 1/4” Bushing 5/16” Bushing 3/8” Bushing
CRUCIBLE LUMP HAMMER
The compact Crucible requires less ef- MANUAL
WOOD THREADER
fort to use than a tradi- These classic thread box
tional wooden mallet and tap sets let you
MADE IN USA & you’ll never need to produce match-
replace it! The 1-1/2” x 1-1/2” x 4”, 2.2 lb head,
(2.5 lb total weight) is made of 4140 alloy steel, ing screws & nuts in your favorite wood. Matching
hardened & tempered to Rc 28-32. Hand finished taps come with an adjustable steel handle. Includes
2 taps, 1 for starting/through cutting, the other is a
faces are smooth-ground at a 5-1/2” radius. Choke bottoming tap for blind holes. Both taps & die cut-
up on the handle for careful taps on delicate work ter can be resharpened. Threader body is plastic.
& grip the handle at its end to deliver a wallop to
hard to assemble parts. Designed by Raney Nelson. Size indicates the size of the dowel used to make
the male threads. They are best for use in hard,
433257 Crucible Hammer (OAL 11-1/2”) $92.00 closed-grained woods like maple & cherry.
THOREX 11-712 NYLON FACE HAMMER 477721 Manual Wood Threader - 1/2” $49.99
Long wearing 1-1/2” dia. white nylon faces un- 477722 Manual Wood Threader - 3/4” $54.99
screw from the Paul Sellers says these 477723 Manual Wood Threader - 1” $57.99
head for replace- are excellent mallets for 477724 Manual Wood Threader - 1-1/4” $63.99
ment. Rugged ny- assembly & chisel 477725 Manual Wood Threader - 1-1/2” $69.99
lon handle has a use. 477714 Repl. Cutter $11.99
textured rubberized
grip. OAL 12”. 1.5 lb. VAUGHAN RAWHIDE
173731 Thorex 712 Nylon Face Hammer $42.99 MALLETS
DEADBLOW MALLETS The original old timer’s
Hundreds of “non-marring mallets” before
metal shot petro-chemical composite plastics emerged.
inside the head of this mallet give maximum Heads are made of tightly compressed, rolled
striking force without rebound. Durable, & seasoned rawhide. Hardwood handles.
non-marring polypropylene head & handle. 129505 Rawhide Mallet (12 oz) $42.99
146084 Deadblow Mallet (6 oz) $15.99 (1-7/8” face dia., 13-1/2” OAL)
146085 Deadblow Mallet (12 oz) $19.99 129506 Rawhide Mallet (24 oz) $69.99
146086 Deadblow Mallet (22 oz) $29.99 (2-3/4” face dia., 16-1/4” OAL)
KREG CONCEALED HINGE JIG For clean holes in the correct position, offset & depth.
This jig positions hinges 2” or more from top or bottom of a door with offsets of 3,
4, 5, & 6 mm. Includes base with index cams, drill guide, stop
collar with hex wrench, 35 mm carbide-tipped drill bit & manual.
124141 Kreg Concealed Hinge Jig $32.99
KREG CABINET HARDWARE JIG Makes installing knobs & pulls simple!
The polycarbonate jig body holds an adjustable stop & 2 adjustable hardened steel
drill guides. It's easy to set up & position the jig to drill accurate mounting holes.
124142 Kreg Cabinet Hardware Jig $32.99 Requires 3/16” drill bit, not included.
(Jig Base, Edge Guide, 2 Drill Guides with Knurled Nuts, 2 Non-slip Pads, 2 T-knobs & Bolts & Manual)
®
VERITAS “SNUG PLUG” 477012 1/4” $20.99 REGULAR PLUG
Sides are rough
TAPERED PLUG CUTTERS 477015 5/16” $21.99 because of fiber
These well-made plug cutters create smoothly 477013 3/8” $21.99 tearing.
tapered plugs to ensure a tight, accurate fit in screw 477016 7/16” $23.99 TAPERED PLUG
countersinks, even if the countersink isn’t perfect. 477014 1/2” $23.99 Sides are smooth
since they’re
477011 Set of 3 Veritas Snug Plug Cutters (1/4”, 3/8”, 1/2”) $54.99 shaved to size
®
while being cut.
GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 47