Page 43 - Highland Woodworking Tool Catalog

Wood Files, Rasps & Rifflers

IWASAKI CARVING FILES These files are a woodworker’s dream!
These files remove material quickly like a rasp, but leave a very clean surface finish. The
curved teeth are arranged like a single cut file, but with the face of each tooth shaped like a
mini-chipbreaker. A shaving
Iwasaki Carving File Unhandled Cutting is forced up & away from the

except as indicated as Handled Files OAL Length Wide Thick file’s face, making teeth less
*
127505 6” Flat Fine 7-3/4” 5-3/8” 5/8” 5/32” $32.99 prone to clog. Tailings aren’t
127506 6” Flat Extreme Fine 7-3/4” 5-3/8” 5/8” 5/32” $34.99 dust, but ultra mini-
127507 6” Half Round Fine 7-5/8” 5-1/4” 5/8” 1/8” $32.99 shavings that look as
127508 6” Half Round Extreme Fine 7-5/8” 5-1/4” 5/8” 1/8” $34.99 if they came from a
127526 6” Half Round Fine Curved 7-1/2” 5-1/4” 5/8” 1/8” $43.99 tiny plane! Handles are tex-
127503 8” Flat Medium 9-1/2” 7-1/4” 25/32” 3/16” $33.99 tured rubber. All files (except
Edge Float) have smooth edg-
127501 8” Flat Medium * 8” 4” 5/8” 5/32” $22.99 es. They are perfect for detail-
127509 8” Flat Fine 9-1/2” 7” 25/32” 3/16” $36.99 ing up to an adjacent surface.
127510 8” Flat Extreme Fine 9-1/2” 7” 25/32” 3/16” $39.99 For use on standard woods,
127513 8” Flat Extreme Fine * 8” 4” 3/8” 1/8” $32.99 or bamboo, OSB, MDF, plas-
127504 8” Half Round Medium 9-1/2” 7-1/4” 13/16” 5/32” $33.99 tics & resins.
127502 8” Half Round Medium * 8” 4” 5/8” 3/32” $22.99
127511 8” Half Round Fine 9-1/2” 7-1/4” 13/16” 5/32” $36.99
127512 8” Half Round Extreme Fine 9-1/2” 7-1/4” 13/16” 5/32” $39.99
127514 8” Half Rd. Extreme Fine * 8” 4” 3/8” 3/32” $32.99
127527 8” Half Rd. Ext. Fine Curved 7-7/8” 4” 3/8” 1/8” $33.99
*
127528 8” Extra Fine Side Float * 8” 4” 1/8”-5/8” 1/8” $59.99 Flat has teeth on both sides.
127529 8” Extra Fine Edge Float * 8” 4” 1/8”-5/8” 1/8” $54.99 Half Round has teeth on 1 side.
127524 10” Flat Coarse 12-1/8” 8-3/4” 1” 1/4” $44.99 Curved has a 7-1/2” radius, with
127525 10” Half Round Coarse 12-1/8” 8-3/4” 1” 1/4” $44.99 teeth on the convex side.
Side Float has teeth on 1 side.
127521 3mm Round Extra Fine * 8” 3-1/2” 1/8” $21.99 Edge Float has teeth on 1 edge.
127522 6mm Round Smooth * 8” 4” 1/4” $30.99 Sizes are approximate due to
127523 8mm Round Smooth 9-5/8” 7-1/4” 5/16” $39.99 metric conversions.
NAREX HAND CUT CABINET RASPS OAL 15-1/2”
These Narex rasps’ differently sized, smaller & more closely spaced teeth are set right up to the
edge of the 10” blank, so not only do you have more teeth cutting but you also can cut right up
to adjacent surfaces. Half-round profiles taper from 147241 Narex Coarse Cabinet Rasp $105.99
1-1/8”wide to 3/4”. The stained hornbeam wood 147242 Narex Medium Cabinet Rasp $124.99
handles have brass ferrules. Rc 49 carbon steel. 147243 Narex Fine Cabinet Rasp $166.99
AURIOU RASPS & RIFFLERS
Auriou rasps have teeth that are individu-
ally “hand-stitched” with a punch that makes AURIOU CABINET RASPS
carefully sized, triangular points in an irregu- Right H Left H Length Grade Width
lar pattern, preventing furrowing, for a superior finish. 124433 124753 8” 11 7/8” $119.99
Auriou’s craftsmen prepare the rasp blanks by forging 124432 124469 9” 10 1” $124.99
& hammering, not stamping. Distortion caused by initial 124704 124705 10” 7 1-1/4” $134.99
heat treating is corrected by more hand-hammering & fi-
nally the blank is polished. Grade numbers are tooth size 124431 124706 10” 9 1-1/4” $144.99
(grade of cut). A higher # is a finer cut. (#8 approximates a 124707 124708 10” 11 1-1/4” $159.99
Nicholson #50.) Length is without 5” walnut handle. 124460 124711 12” 6 1-1/2” $149.99
Modeller’s Rasps are shaped like cabinet rasps, but 124430 124712 12” 8 1-1/2” $159.99
with a longer taper at the end & a slightly thinner profile, 124713 124714 12” 10 1-1/2” $169.99
so they are a bit more nimble in the hand. 124715 124716 12” 12 1-1/2” $189.99
The ALBI Combo Rasp is double sided.
Auriou Ironing Rasps’ curved shape gives clearance for AUROIU MODELLER RASPS
your knuckles. 124717 124718 6” 15 7/16” $129.99
The Curving Rasp 124435 124719 7” 13 1/2” $119.99
(Chairmaker’s Rasp) is a large specialized curved riffler 124758 124759 10” 9 29/32” $139.99
with a round-ended half-round stitched rectangle on one 124760 124761 10” 11 29/32” $154.99
end, & a half-round stitched V on the other. AURIOU ALBI COMBO RASP
For ultra-fine detailing, Needle Rasps’ cutting surfaces 124740 124741 10” 5 & 9 1” $119.99
are approx. 2-3/4” x 1/4” (flat, rat, half-round & knife.).
AURIOU CURVED IRONING RASP
124720 124721 2-3/4” 12 3/8” $69.99
AURIOU RIFFLERS 8” Long Grade 12 $82.99 ea. 124436 124765 3-1/4” 10 3/4” $72.99
124451 Flat V & Rect AURIOU CURVING RASP (Chairmaker’s rasp)
124453 Half Round & Tri 124748 10” 7 7/8” $99.99
124450 Knife & Spoon AURIOU RAT TAIL RASP
124736 Rat Tail & Oval 124463 6” 13 1/4” $89.99
124725 Rhombus & Brush 124701 10” 9 3/8” $109.99
124732 Thumb & Laurel 124471 7” 4 pc Needle Rasp Set $189.99
GO TO WOOD NEWS OUR ONLINE NEWSLETTER AT HIGHLANDWOODWORKING.COM 43