Page 62 - highland-woodworking-earlyfall2022-catalog

Bandsaw Accessories ITURRA DESIGN SPINNER
BANDSAW TENSIONING CRANK
KREG BANDSAW FENCE Upgrade the blade tension knob
A vast improvement over most on older Delta & Jet 14” bandsaws.
14” saw fences, this 18” alumi- The heavy cast iron 4-7/8” dia. hand-
num extruded fence wheel & 3” crank handle have a pol-
adjusts front to back ished chrome finish. The 13-1/2” long
along its length, fastens 3/8” x 12 TPI Acme rod (& 3/4” thick
at any point on the 26” brass tension nut), positions the hand-
front rail & adjusts for blade lead. It accepts shop- wheel above the upper wheel shroud of
made add-ons like high fences, stop blocks & Kreg’s your bandsaw. The rod end that bears on the saw’s
optional curved resaw guide. The tape has an inte- frame has a conical point to reduce rotational fric-
gral lens cursor for easy reading. Optional microad- tion, while the brass nut helps disperse stresses on
juster precisely dials in width of cut. the threads. Please Note: Spinner Bandsaw Tension
124023 Kreg Bandsaw Fence $139.99 Cranks are intended to fit older Delta/Rockwell 14” & Jet
124024 Kreg Precision Micro-Adjuster $31.99 14” saws WITHOUT a factory equipped quick release
124025 Kreg 4-1/2” Resaw Guide $29.99 tension lever. They will fit onto saws equipped with the
124026 Kreg 7” Resaw Guide $34.99 Carter Quick Release™ tension lever.
189105 Spinner Delta 14” Bandsaws $74.99
CARTER MAGFENCE II 189106 Spinner Jet & Import 14” Bandsaws $74.99
Magnetic Bandsaw Fence
A twist of 2 knobs engages BLADE ROUNDING STONE USE DRY
powerful magnets that hold Use this 3” x 1/2” silicon carbide
this 15” long x 3” high universal stone on a 7” hardwood handle to
aluminum fence to your cast iron gently round the back corners on your bandsaw
bandsaw table, avoiding tedious installation. T- blades. They’ll run more coolly, quietly & efficiently.
slots allow accessory attachments. Also works on 486031 Blade Rounding Stone $15.99
cast iron drill press tables.
BANDSAW WHEEL BRUSH
189262 MAGFENCE II Bandsaw Fence $139.99 Keeps bandsaw wheels free of debris,
®
CARTER ACCURIGHT LOG MILL™ improving tire life & blade tracking
1-1/2” long nylon stock filaments con-
This sled system cuts raw wood logs to be
square so they are usable lumber stantly brush the wheel, sweeping it
on a bandsaw. It’s great for clean without excessive abrasion. Just drill 1 hole in
cutting a flat into a round the rear blade guard to mount next to lower wheel.
log for natural edge bowls. 189104 Wheel Brush for 14” Bandsaws $7.99
®
189261 AccuRight Log Mill™ $179.99 QUICK CRANK BANDSAW TENSIONER
Release tension at the end of every day’s work!
CARTER ACCURIGHT The small tension knobs standard on many
BANDSAW TABLE INSERTS
These 2-1/2” dia. nylon zero-clear- 14” bandsaws are slow & tedious to use,
ance throat plates virtually eliminate tearout on the making blade changes a chore. This
exit side of work. Saw a narrow kerf partway through crank handle adjusts blade tension in seconds &
the plate, & drop it into the saw throat opening. slackens the blade at day’s end. Includes 3/8”-16
square nut to replace the metric nut if needed. Fits
Carter 14” Bandsaw Table Insert 3 pks $11.99 ea. most 14” bandsaws without quick release lever arms.
189272 Delta & Steel City 14” 189273 Jet 14” 185189 Quick Crank Bandsaw $29.99
Replace old & weathered bandsaw tires with these durable & long wearing Blue Urethane or Rubber tires.
CARTER BANDSAW TIRES Blue Urethane dia. x width Rubber dia. x width x thickness
Blue Urethane tires are a consistent 3/32” thick 189221 12”x7/8” $28.99 189203 10”x3/4”x1/8” $27.99
across their width for optimum blade tracking &
are typically installed without adhesive. Rubber 189222 14”x7/8” $32.99 189204 12”x1-1/16”x5/32” $29.99
Stretch-On Tires may require an adhesive. 189223 16”x1-1/2” $48.99 189205 14”x1-1/16”x5/32” $34.99
189224 18”x1-1/2” $51.99 189206 16”x1-5/16”x5/32” $43.99
PROLONG BLADE LIFE & INCREASE ACCURACY
486001 Delta 14” 1/2” x 1/2” x 3/4” (1 beveled) $16.99
BANDSAW “COOL BLOCKS” 486005 Jet 14”, Ridgid 1/2” x 1/2”x 3/4” $16.99
Graphite impregnated, phenolic resin
composite blocks let you set the bandsaw 486002 Sears 12”, Delta 10” 3/8” x 3/8” x 3/4” $16.99
486006 Old Sears
1/4” round x 3/4” $16.99
blade closer than with metal guide blocks for more 486009 Jet & Delta 12” 5/16” square x 3/4” $16.99
stable & accurate cutting. With friction & heat reduced, 486004 Shopsmith 11” $22.99
blades run more coolly, smoothly, quietly & last longer. 486010 Delta 8” 3/16” round x 7/8” $16.99
HIGH TENSION SPRING for 14” Bandsaws BANDROLLERS Ball Bearing Guides
The compression spring in your bandsaw’s Bandrollers are designed to slip in
upper wheel assembly cushions against sud- your saw’s 1/2” x 1/2” guide hold-
den shock or increased tension if the blade ers. Their double-sealed ball bear-
bows within a cut. Revitalize your saw by re- ings run virtually friction free so
placing the old, fatigued spring with this flat they can be in direct contact with
stock high strength chrome-vanadium alloy the blade without causing excessive heat or blade
spring, coiled and milled flat on the ends for supe- wear. Delta set has 1 lower guide at 45°angle. Tai-
rior performance. wan set has all 4 guides straight. For 1/4” or wider
489003 2-1/2” Bandsaw Spring for Delta $19.99 blades. Use Cool Blocks for 3/16” & 1/8” wide blades.
489004 3” Bandsaw Spring $19.99 489001 Bandrollers for Delta 14” Saws $76.99
for Jet & similar 14”
489002 Bandrollers for Taiwan 14” Saws $76.99
14” BANDSAW THRUST BEARING SET
Replace your bandsaw’s worn thrust bearings with these high-quality replacement bearings, packed
with high-temperature grease with double seals to keep out dust. Reversible for long life. Fits Delta
& Jet 14” & most clones. 3/8” i.d. 1-3/16”o.d. 189101 Thrust Bearing Set (pair) $17.99
60 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748