Page 59 - highland-woodworking-earlyfall2022-catalog

Turning Tools

TERMITE TOOL FROM ONEWAY ONEWAY MASTERCUT
Ring tools excel at hollowing & finishing end grain. MANUFACTURING GOUGES
The Termite's HSS bits are precisely milled with Mastercut gouges are made of CPM
computer-optimized geometry making a versatile, fast- M4 HSS, which takes a keener edge &
cutting, easily maintained tool. 15-1/2” hardwood stays sharp up to 3X longer than conventional HSS.
handle. 7-1/2” shank. Spindle Gouges have narrow flutes ground above the
141525 Oneway Termite Kit $106.99 centerline of the tool, leaving more mass & stiffness
3/8” & 1/2” dia. bits, grinding point, bit holding block & instructions than usual in a shank. The 3/8” Bowl Gouges have a
141526 Oneway 5/8” Termite Bit $30.99 relatively tight flute, designed for easier fine finishing.
141527 Oneway Repl. 3/8” Termite Bit $26.99 1/2” & 5/8” Bowl Gouges have wide, more traditional
141528 Oneway Repl. 1/2” Termite Bit $28.99 flutes. 15-1/2” long Double-ended Gouges have flutes
141529 Oneway Repl. Grinding Point $7.99 ground in both ends, adding versatility & value. Tools
141530 Oneway Grinding Block $12.99
are sold unhandled. Double-ended tools are not suitable
ONEWAY SURE-GRIP HOSALUK for wooden handles. We recommend the Oneway Sure-
TOOL HANDLES Grip Hosaluk steel handles. Oneway Mastercut Gouges
Dampen vibration & add mass & rigidity by mount- are slightly oversized of their stated dia. & as a result, the tool
ing your favorite turning tools in these plastic coated may not insert into other lathe turning tool handle systems.
steel handles. Ends are bored to 5/8” & 1/2”. (Optional 141522 1/2” MC Spindle Gouge (OAL 10”) $63.99
adapters fit 3/8” or 3/4”.) 2 set screws lock tools firmly 141531 3/8” MC Bowl Gouge (OAL 12-1/2”) $69.99
in place. For more mass & rigidity, fill your handle 141523 1/2” MC Bowl Gouge (OAL 12-1/2”) $79.99
with shot or attach 2 or more handles together. 141524 5/8” MC Bowl Gouge (OAL 12-1/2”) $99.99
141520 Hosaluk Handle 12” (1.75 lbs.) $59.99 141532 1/2” MC Double-ended Spindle Gouge $89.99
141521 Hosaluk Handle 17-1/2” (2.5 lbs.) $69.99 141533 3/8” MC Double-ended Bowl Gouge $95.99
141542 5/8” to 3/8” Tool Handle Adapter $14.99 141534 1/2” MC Double-ended Bowl Gouge $111.99
141543 5/8” to 3/4” Tool Handle Adapter $28.99 141539 5/8” MC Double-ended Bowl Gouge $139.99
ONEWAY 4-WAY LIVE CENTERS The finest live centers we sell.
These live centers have long wearing, heavy-duty, dual ball bearings. They include a cup
center with a replaceable point (plus knock-out 180331 #1MT Oneway Live Center $139.99
bar) & 2 threaded cones (1-11/16” & 3-7/16” 180332 #2MT Oneway Live Center $139.99
max. dia.) to mount & center work with drilled center holes. 180333 #3MT Oneway Live Center $139.99
INTERNAL
ONEWAY 4-JAW SCROLL CHUCKS FOR THE LATHE EXTERNAL CHUCKING
CHUCKING
These self-centering scroll chucks provide secure gripping power & versatil-
ity when holding stock for turning. Both the Talon, our most popular model,
& the Stronghold use a large T-handled chuck key. Optional jaw sizes gives
these chucks a wide grip range. Threaded mounting adapters, sold separately,
insert into the chuck body, which then screws onto your lathe’s spindle. Extra adapters offer
an economical way to use the same chuck on different lathes. Talon chucks accept adapters up to 33mm. Strong-
hold Chucks use 1-1/2”-8
ONEWAY CHUCKS Body only; order mounting adapter, (below), separately. adapters. Chucks include #2
MODEL DIA. WEIGHT OPERATION STD. JAW CAPACITY
profile jaws, operating key/
181100 Talon 3-1/2” 2.85 lbs geared key ext. 1-5/8–2-7/8”, int. 2–3-1/2” $239.99 levers, instructions & 1/2” x
181300 Stronghold 4-1/2” 6.75 lbs geared key ext. 2–3-1/2”, int. 2-5/8–4-1/8” $299.99 1-1/4” Woodworm screw.
SCROLL CHUCK OPTIONAL JAWS FOR ONEWAY’S SCROLL CHUCKS
MOUNTING ADAPTERS See our website for a complete selection of optional jaws.
Select last 2 digits from the mounting Profiled style jaws flair at the top & are toothed for maximum
adapters (listed in red) below. holding power with minimum damage to the piece.
1801__ Talon Adapters $29.00 Spigot jaws are 1” deep to better grip smaller parts.
1802__ Stronghold Adapters $29.00
01 5/8” Plain Shopsmith OPTIONAL JAWS FOR TALON SCROLL CHUCKS (Fit ONEWAY)
02 3/4”–16tpi Sears, Record (capacity listed approximate * to 1/8”, or ** to 1/4”)
03 1”–8tpi Delta, Jet, General 160 181112 Profiled Spigot ext. 1/4–1-5/8”, int. 1–2-3/8” $47.99
06 1-1/4” – 8tpi Powermatic, General 260 181111 #1 Profiled Step ext. 3/8–1-7/8”, int. 1–2-1/2” $46.99
07* 1-1/2” – 8tpi Conover 181116 Mini Jumbo ext. 2–7-7/8”, int. 4–9-7/8”** $108.99
08* 1-1/2” – 8tpi Powermatic 90
181117 Jumbo ext. 2–10-3/4”, int. 4-7/8–11-3/4”** $119.99
09 33mm–3.5tpi Oneway, Hegner
*FOR STRONGHOLD CHUCK ONLY OPTIONAL JAWS FOR STRONGHOLD SCROLL CHUCKS
SCROLL CHUCK ACCESSORIES 181312 Profiled Spigot ext. 3/8–2”, int. 1-1/8–2-5/8” $56.99
180111 1/2” x 2” Woodworm Screw $30.99 181320 #4 Profiled ext. 4-1/4–5-3/4”, int. 4-7/8–6-1/2” $67.99
180112 1” 4-Spur Chuck Drive Center $41.99
180114 Extra Buttons - Jumbo Jaws $29.99 181317 Jumbo ext. 2-3/4–11”, int. 4-3/4–12” $119.99
181318 Mega Jumbo ext. 1-3/4–14”, int. 4-3/4–15” $145.99
ONEWAY VACUUM CHUCKS
A through bored headstock with a threaded outboard nose spindle allows you to mount a vacuum chuck for
instant, positive, non-marring holding power. A Vacuum Chuck System requires a
Oneway’s heavy aluminum drum chucks seal well against Drum Chuck, Vacuum Gauge Kit,
flat, convex or concave surfaces. Use the largest chuck that Rotary Air Fitting, Vacuum Pump &
will fit your work, (5-1/2” is most popular). Gast vacuum Inboard & Outboard Threaded Stronghold
pump draws up to 26” of mercury, with 4.5 max. CFM. Mounting Adapters (listed above).
181400 3-1/2” Oneway Drum Chuck* $57.99 181721 Vacuum Gauge Kit $106.99
181500 5-1/2” Oneway Drum Chuck* $80.99 (gauge, bleeder valve, bracket with hardware &
181600 8” Oneway Drum Chuck* $219.99 5’ reinforced 3/8” air hose)
181800 12” Oneway Drum Chuck* $299.99 181722 1/4 HP Gast Vacuum Pump $689.99
181700 Rotary Air Fitting* $99.99 *Requires Stronghold Mounting Adapter, listed above.
SEE OUR SELECTION OF ONEWAY LATHES AT HIGHLANDWOODWORKING.COM 57