Page 35 - highland-woodworking-earlyfall2022-catalog

VERITAS Spokeshaves &
LOW ANGLE Based on a
SPOKESHAVE 19th century wooden design. Drawknives
This small spokeshave’s easily adjusted reversible
TRAVISHER
toe piece handles flat or concave work equally well. This 3” wide convex spoke-
10-1/2” body is solid die-cast aluminum, giving it shave is used for chair seat shaping after the adze,
nice heft. PM-V11 powdered metal alloy 2” x 1/8” scorp & compass plane have roughed in & refined
blade sharpens & holds a keen edge nicely, even the form. The handles continue the blade’s curve,
compared to A2 steel. rising out of the way of adjacent surfaces for unob-
177135 Veritas Low Angle Spokeshave $99.99 structed reach into deep hollows. 4-1/2” sole radius.
177136 2” Repl. Blade (PM-V11) $33.99
471144 Travisher $119.99
CONCAVE & CONVEX SPOKESHAVES C
These 10” spokeshaves excel at planing curved surfaces D
along the grain. Both have 2-3/4” curvature radius & 2-1/16” wide irons.
C 433908 Convex Spokeshave (for concave cut) $42.99 D 433910 Concave Spokeshave (for convex cut) $42.99
433909 Convex Repl. Cutter $19.99 433911 Concave Repl. Cutter $16.99
GALBERT DRAWSHARP by BenchCrafted, USA
Peter Galbert’s honing jig design yields consistent, repeatable & sharp results!
Referencing the drawknife’s spine, this anodized aluminum jig has 2 posts that adjust to
guide at the set honing angle with 1 for the bevel & the other for the back of the blade. A clear
scale lets you note the setting. An acetal wear plate & nylon bumpers glide smoothly.
Abrasive pads on sleeves, (a fine diamond surface & a finer abrasive paper), slip onto
posts. Comes in a metal can with enough abrasives for many sharpenings.
135201 Galbert Drawsharp $104.00
VERITAS CORNERING TOOLS
The lightest & most casual tools we know of for rounding over edges quickly. Tools cut on both
push or pull stroke & have 2 cutting radii: 1/16 & 1/8”, and 3/16 & 1/4”. Includes resharpening tool.
436003 Pair of Cornering Tools $49.99
MADE IN
USA Please expect lengthy delays for Barr Tools.
BARR This hand-forged tool
DRAWKNIVES BARR has a hollow ground,
Hand-forged wear-resistant CHAIRMAKER’S razor sharp, 6-3/8”
steel has a tough cutting edge. DRAWKNIFE cutting edge. Cap
The nicely shaped hardwood nuts secure 5-1/4” long hardwood handles on
handles are bent to a 20° angle for efficient, comfort- full length threaded tangs. 1 lb. OAL 13”.
able use. Larger sizes are designed for peeling logs, Standard has a 1/4” x 1-1/4” blade with a 25°
but their sharp edges also allow fine work. Carver’s bevel & handles that are slightly bent up. Slim has a
knife has a gently radiused edge & a small back bevel 1/4” x 7/8” blade with a 25° bevel for tight cuts.
to maximize control & minimize tear-out. 129658 Std. Chairmaker’s Drawknife $151.00
129653 6” Carver’s Drawknife $151.00 129659 Slim Chairmaker’s Drawknife $163.00
1-1/2” x 6” blade , OAL 15” BARR
129678 Small Leather Blade Guard $39.00 CHAIRMAKER’S SCORPS
129652 9-1/2” Drawknife $174.00 Also called an inshave, this tool has
3” x 9-1/2” blade, OAL 19”
129679 Medium Leather Blade Guard $44.00 the perfect sweep & handle angles for rapid
129651 12” Drawknife $185.00 & efficient wood shaving on chair seats.
3” x 12” blade, OAL 22” 471139 4” Dunbar Style Scorp $163.00
129680 Large Leather Blade Guard $44.00 129650 6-1/2” Chairmaker's Scorp $163.00
NAREX 6” CARVER’S DRAWKNIFE
This 6” drawknife is used for small shaping jobs - shaping chair spindles Includes a
to roughing carving blocks & spoon handles. The straight chrome vana- protective
dium steel blade is 1/8” (3mm) thick x 9/16” (15mm) wide x 6” (150mm) leather sheath.
long & hardened to Rc 57. Czech Beech handles are 4” (100mm) long & 147112 Narex $89.99
1” (25mm) in dia. at the widest point. Honing required before use. Carver’s Drawknife
NAREX DRAWKNIVES These Narex drawknives have 9-1/2” long cutting edges that are forged
from chrome steel & hardened to Rc 55. The blades measure approx. 5/32”
(4mm) thick by 1-9/16” wide (40mm) & are offset about 3/4” (20mm)
from the handles. Good for general roughing work & bark removal.
147114 Narex Straight Drawknife (OAL 17-1/2”) $99.99
147117 Narex Curved Drawknife (OAL 18-1/2”) $106.99
FROM THE MUELLER FORGE IN AUSTRIA FLEXCUT DRAWKNIVES
These beautiful draw-
knives, made of high
MUELLER DRAWKNIFE quality spring steel,
This drawknife has a slight belly to are sharpened & pol-
the leading edge & a gentle sweep in ished to a razor edge.
the horizontal axis to afford better con- Flexcut’s sculpted handles are set in the plane of the
trol for pinpoint stock removal. Cutting length blade & splayed for comfortable pulling. Perfect for
is approx. 9-1/2”. Blade width is 1”. Painted roughing in carving blanks, or shaving furniture parts
handles are 4”. OAL 16-1/2”. down to rough size. Includes leather blade sheath.
179423 Mueller 9-1/2” $62.00 125198 Flexcut 3” Straight Drawknife $44.99
Curved Drawknife 125050 Flexcut 5” Curved Drawknife $57.99
BARR TOOLS ARE EXPERIENCING LIMITED AVAILABILITY 33