Page 68 - highland-woodworking-earlyfall2022-catalog

Safety Equipment

KREG TRUE-FLEX
FEATHERBOARDS
These fit into any
3/8” x 3/4” miter slot
HEDGEHOG SPIRAL FEATHERBOARD on your machines &
A unique spiral shape & a single pivot point expe- include hardware for
dite & simplify setup. It can be reconfigured to use fitting T-slots. Tough 4” plastic fingers are 2-3/8”
on either side of fence and lets you set & reset quick- deep. Reversible for use with both feed directions.
ly to the changing width of your board. 124309 Kreg True-FLEX Featherboard $24.99
176731 Hedgehog Featherboard $39.99 124310 Twin Pack True-FLEX Featherboards $39.99
MAGSWITCH FEATHERBOARDS Rip, route, shape, joint & drill with more safety & precision!
A quick turn of a knob aligns a powerful magnet, gripping your cast iron tool
surfaces with incredible force. You get fast setups & increased placement
options since you’re not bound by a machine’s miter slots.
The Magswitch Starter Kit has The Vertical Featherboard At-
a universal base, 2 removable Mag tachment works with the Start-
Jig 150 clamps & a reversible low er Kit & Pro Table Feather-
profile featherboard attachment for L & board. It lets you apply
R sided feeds. Mag clamps can be removed to use in downward pressure as you
your homemade fixtures & fences. feed your stock. Use the included risers to stack it on
The heavy, 1” thick Magswitch Pro top to add horizontal pressure with thicker material.
Table Featherboard is for table 169520 Magswitch Starter Kit $119.99
saw use with the rip fence right of the blade 169502 Magswitch Pro Table $79.99
or shaper tables feeding stock from R to L. 169518 Magswitch Vertical Attachment $23.99
GRR-RIPPER ADVANCED The Gravity Heel Kit has 5 replaceable “heels” that
3D PUSH BLOCK SYSTEM can retract mid-board, but will drop
A stock control system down to hook the end of a work-
engineered to help piece. They’re made from a plas-
you cut & route tic that can be cut or milled
safely & accurately on to help prevent tearout at
your tablesaw & router. the end of your cut.
The Micro Jig GRR-Ripper The Handle Bridge Kit
Advanced Push Block provides improves handle positioning & pressure distribution
a safe and reliable method to grip, hold & feed your for safe stock holding.
stock across your tablesaw, router, jointer or band- The Deflector/Connector
saw. Its large guide handle ensures your hand is well connects 2 GRR-Rippers se-
clear of the blade. The jig’s design lets you set up for curely & covers the blade or
ripping stock of different thickness, guiding both bit, acting as a chip guard.
your keeper piece & cut off piece for increased con- (Handle Bridge Kit is required
trol. For the milling of short workpieces, this jig is to install Deflector/Connector.)
simply indispensable for unmatched safety & con- 169583 GRR-Ripper Advanced $84.99
trol. The push block has 1/2” & 1/4” spacer legs for 3D Push Block
spanning your material & a stabilizing 169587 1/8” GRR-Ripper Side Leg $16.99
plate for use with narrow stock. 169598 Gravity Heel Kit $16.99
An optional 1/8” Side Leg lets 169584 Handle Bridge Kit $15.99
$13.99
you handle even thinner stock. 169585 Deflector/Connector $139.99
169578
GRR-Ripper Advanced
Other optional accessories increase the range & safe- 3D Push Block Complete System
ty of controlling stock even further. (Includes all 5 Grr-Ripper Stock Control jigs above)
SAFETY STARTER KIT This highly visible yellow 3 piece starter kit is an economical way to improve
safety when cutting boards with power tools. The featherboard helps hold
your stock more firmly against fences. The push block & push stick improve
control while cutting, keeping your hands away from spinning blades & bits.
168004 Safety Starter Kit - 3 Piece $22.99
MICRO JIG GRR-RIP BLOCK POWER HANDS™ PUSH STICK
Use on table saws, jointers, This 13” long push stick has
bandsaws & router tables. 2 replaceable rubber treads:
This 9” x 3-1/2” push block flat for table saws & jointers, &
has the Grr-ripper non-slip bottom plus V-shaped for both in & down
the unique Gravity Heels for extra versatility & con- pressure on router tables or shapers. A spring-loaded
trol. Drop-down heel hooks are there when you rear pin retracts when using on flat surfaces.
need them & instantly retract when you don’t. 168010 Power Hands™ Push Stick $34.99
169597 Micro Jig GRR-Rip Block $34.99 Not for use on stock less than 3/4” wide.
V PUSH STICKS PUSH BLOCK & STICK
Shoe-style push sticks let you easily apply Recommended for work
downward pressure as you push stock. with small stock or when surface-jointing.
6-1/4” bearing length forward of heel Soft, long-wearing foam pads securely
notch. A “V” groove in the sole snugs the stick on a grip stock. Canted handles make it easy to
corner of a board. 8-1/2” x 6” tall. 7/16” thick stiff work next to a fence without barking your knuckles.
plastic resists shattering if cut. Hole for hanging. 431019 Pair of Push Blocks (3” x 6”) $8.99
168003 V Push Sticks (pair) $7.99 168002 Standard Push Stick (11” long) $7.50
66 ORDER ONLINE AT HIGHLANDWOODWORKING.COM OR CALL 800-241-6748