Page 11 - highland-woodworking-earlyfall2022-catalog

Workbenches & Hardware

HOFMANN & HAMMER PREMIUM GERMAN WORKBENCHES
The workmanship that goes into these fine benches is simply outstanding.
All 4 models come ready for assembly. (Just bolt the stretchers to the legs, &
lay on the top.) The solid beech stock is clear, straight & beautifully finished.
The Compact, Medium & Large models have a wooden jaw shoulder vise
mounted flush with the left end of the bench, a tail vise that serves as a dog vise,
vise handles, a pair of steel square bench dogs & a Round bench dogs sold
Editor’s Choice full-length tool well. Large & medium bench- separately (below).
“BEST VALUE” es have a drawer. The All-Around has round dog
in FWW
holes in the bench top & tail vise, with a double row of
holes across the top’s width that work with the front shoulder vise. Holes
along the front apron are for handling large panels & doors. Top is con-
tinuous, with no tool well. Truck shipping charges apply. Contact us for a truck shipping quote.
Hofman & Hammer Shoulder Vise Width/ Tail Vise Width/ Front Edge Work Surface Overall
German Workbench Max. Vise Opening Max. Vise Opening Thickness Thickness Size Weight Price
16-1/2” 14-1/2” 51-1/2” x 20”
114101 COMPACT 3-1/2” 1-5/8” 99 lbs. $999.99
7-1/4” 7” 34” high
16-1/2” 14-1/2” 71” x 22”
114102 MEDIUM 3-1/2” 1-5/8” 132 lbs. $1199.99
8” 7” 34” high
19-3/4” 6” 85” x 25-1/2”
114103 LARGE 4-1/2” 2-1/4” 286 lbs. $1999.99
9-1/4” 10-1/4” 34-1/2” high
114146 ALL-AROUND 19-3/4” 6” 4” 2” 71” x 23-5/8” 220 lbs. $1799.99
7-1/2” 6-1/2” 34-1/2” high
HOFMANN & HAMMER Posts slide apart VERITAS LOW-PROFILE
SIDE BENCH DOGS up to 24-1/2” PLANING STOPS
Side dogs allow you to clamp a Low-profile stops have 1-1/4”
workpiece on the front face of your up to 16-3/4” wide anodized aluminum rail
workbench using dog holes in the up to 9” projecting 0.22” above the sur-
top of your bench, tail or end vise. face, so material as thin as 1/4” can be worked or
The post drops into the dog hole & planed without obstruction. 2 steel posts slide along
hangs over the edge of the workbench to gap your a T-track on the underside of the rail. 3/4” dia posts.
workpiece. Swiveling jaws adjust to any bench. Fits 177094 9-3/4” Low Profile Stop $27.99
round & square holes that accept a 19mm (3/4”) dia. 177096 17-1/2” Low Profile Stop $33.99
post. The dog hole edge can’t be more than 50mm 177098 25-1/4” Low Profile Stop $39.99
(~2”) from the bench edge.
114152 H&H Side Bench Dogs pair $79.99 ROUND ALUMINUM BENCH DOGS
Milled, sloped face secures stock & a fric-
(includes 1 right & 1 left side dog)
tion spring holds the dog in 3/4” dia. hole
VERITAS in any thickness benchtop. Sold in pairs.
PRAIRIE DOG
Stays ready & out of your 169134 Alum. Bench Dogs (4-3/8” post) $21.99
169135 Short Alum. Bench Dogs (2-1/4” post) $17.99
way until you need it. 169136 Set of 4 Alum. Dogs (2 std. & 2 short) $32.99
A press of a finger pops
the 3/4” dia. solid brass Prairie Dog out of its hole & VERITAS PARF DOGS
locks it in place ~ 5/16” proud. Press it again to re- Peter Parfitt designed these dogs to let
tract it back out of your way. The spring mechanism you take advantage of the grid of the Festool MFT/3,
fits holes 2 to 2-1/2” deep. Use Stop Plates with rare or any 20mm post hole, to set up accurate & repeat-
earth magnets (included) on through holes & pivot able cuts. Machined from stainless steel, they in-
them aside when not needed. In blind holes, coun- clude a 25mm collar & an M8 threaded hole that
tersink a washer (included) at the bottom of the hole. accepts knobs for jigs & fixtures. 10mm (~ 3/8”) tall.
Optional stop plates allow use in additional holes. Note: 19.90mm posts will not fit a standard 3/4” hole.
177086 Veritas Prairie Dog Pair $34.99 177127 Steel Parf Dogs 2-pk $19.99
177087 Prairie Dog Stop Plates 4-pk $5.50 485617 2-3/8” dia. Fluted Knob $1.50
VERITAS ROUND BRASS VERITAS MUZZLES
®
®
BENCH DOGS & PUPS ® For Bench Dogs or Pups ®
Friction springs keep the 3/4” dia. Hard plastic spring-grip sleeves slip on
posts snug in any bench top thick- Veritas® Dogs & Pups® (& round aluminuum
ness. 5° undercut face grips securely dogs, above) to cushion the surface. 6 face ribs
& rotates to hold stock that isn’t square. Sold in pairs. grip tightly without marring. Sold in pairs.
®
419714 Veritas Round Dogs (4-3/8” post) $37.99 177082 Veritas Muzzles - Pups (3/4” high) $2.99
®
®
®
®
419715 Veritas Round Pups (2-1/4” post) $31.99 177081 Veritas Muzzles - Dogs (1-1/4” high) $3.50
®
®
®
®
VERITAS WONDER DOG & PUP
Mount into a 3/4” dia. hole to create a holding system without using a tail vise –
perfect for retro-fitting into benches built without dogs. They pivot in any direction.
Post is min. 7/8” above bench. 3/4” high brass clamps. Screw angles 2° for secure grip Amazingly
& a steel spring 417004 Veritas Wonder Dog (4-3/4” post) $46.99 useful accessories
®
®
wire prevents slipping. 417007 Veritas Wonder Pup (2-5/8” post) $42.99 for any bench.
®
®
VERITAS SURFACE CLAMP
These small bench hold-downs that will fit anywhere you can drill a 3/4” hole. Blind holes must
be min. 1-3/8” deep. Through holes can be as thin as 5/8” (depending on material strength). A
turn of a knob wedges the post in tightly. Their compact size makes them ideal for use on drill
press auxiliary tables & sliding table saw jigs. Made from steel, brass & aluminum. Max. opening
is 3-3/4” thick with a throat depth of 2-1/8”. 177045 Veritas Surface Clamp $89.99
GO TO HIGHLANDWOODWORKING.COM TO SEE OUR COMPLETE PRODUCT LINE 9