Page 6 - fall-2021-highland-woodworking-catalog
P. 6

Festool

     FESTOOL T-18+3-E EASY CORDLESS DRILL DRIVER
      This simple, tough workhorse includes Festool’s most popular drill features.
     The steel keyless chuck is permanently mounted. A 2-range variable speed EC Tec
     motor insures that you can select & maintain the right speed for the job. An elec-  NEW!
     tronic clutch gives better control over driving to help avoid camout & overdriving.
     LED illuminates the target when you squeeze the trigger. State-of-the-art lithium-
     ion cells charge in less than 70 min. Charger is also compatible with legacy Festool NiCad & NiMH batteries.
           Festool   Chuck   RPMs    Volt  Right Angle   Two   Charger   Weight
           Drill     Capacity            Chuck  Ah Batteries
     725403 T18+3 E Basic  1/2”  0-450, 0-1500  18  No  2.6 Li-Ion  No  3.97 lbs.  $199.00
     725404 T18+3 E Set  1/2”  0-450, 0-1500  18  No  2.6 Li-Ion  TCL 6 Rapid  3.97 lbs.  $299.00
                                                         Charger
     FESTOOL VS CORDLESS DRILLS             CXS                       PDC18/4
     Drilling & driving are made easy with Festool’s durable   TXS
     & dependable drills. 3 year warranty includes batteries.
       The CXS & TXS are Festool’s smallest Li-Ion drills.
     Compact but powerful, they excel at reaching where larger
     drills can’t go. The battery is located low on the handle, for   T18
     increased balance & comfort for long term use.           C18
      The larger C18 & T18 have innovative monitoring circuitry with sensors on the electronic clutch
     that disengage the motor (with an audible signal) when the torque setting is reached. Slide a switch to change
     from a clutch drive setting to drilling mode, & back again, while maintaining the original torque setting.
      The powerful PDC Quadrive has a four-speed gearbox; a low gear to hog out material, mid-range gears for
     ordinary drilling needs, & a high-speed hammer function to drill concrete. A tough glass-reinforced nylon
     housing with a cast aluminum cover on the front protects the motor. Removable, multi positional
     right-angle handle adds a sure grip. Max. torque of 531 lbs. in steel & 354 lbs. in wood. Quadrive
     Basic does not include battery or charger, but can use one from another 18V Festool cordless tool.   RIGHT
     All Drills come with 3-Jaw Keyless chuck & a Centrotec chuck, (the lightweight, compact, quick re-  ANGLE
     lease chuck that accepts Festool Centrotec drilling & driving accessories), a magnetic bit holder for   CHUCK
     1/4” hex-shanks, built in LED & battery fuel gauge, integrated belt clip, on board bit storage & a Systainer case.

          Festool    Chuck   RPMs   Volt  Right Angle   Two   Charger   Weight
          Drill     Capacity             Chuck  Ah Batteries
     722972 CXS       3/8”  0-400, 0-1200 10.8  No  2.6 Li-Ion  MXC  1.98 lbs.  $260.00
     722973 CXS Set     3/8”  0-400, 0-1200 10.8  Yes  2.6 Li-Ion  MXC  1.98 lbs.  $315.00
     722993 TXS       3/8”  0-400, 0-1200 10.8  No  2.6 Li-Ion  MXC  1.98 lbs.  $260.00
     722994 TXS Set   3/8”  0-400, 0-1200 10.8  Yes  2.6 Li-Ion  MXC  1.98 lbs.  $315.00
     725407 C18 Basic  1/2”  0-450, 0-1500  18  No  No     No   3.75 lbs.  $299.00
     725408 C18 Set   1/2”  0-450, 0-1500  18  Yes  4.0 Bluetooth TCL 6 Rapid  3.75 lbs.  $499.00
                                                         Charger
     725405 T18+3 Basic  1/2”  0-450, 0-1500  18  No  No   No    3.85 lbs  $299.00
     725406 T18+3     1/2”  0-450, 0-1500  18  Yes  4.0 Bluetooth TCL 6 Rapid  3.85 lbs  $499.00
          Set                                            Charger
     725409 PDC18/4    1/2”  0-400, 0-850,   18  No  No    No    4.1 lbs  $349.00
          Basic           0-1850, 0-3800
     725410 PDC18/4   1/2”  0-400, 0-850,   18  Yes  4.0 Bluetooth TCL 6 Rapid  4.1 lbs  $549.00
          Set             0-1850, 0-3800                 Charger
     FESTOOL DOMINO JOINERS  A hand held power mortiser is fast, simple & accurate.
     Domino Joiners use an oscillating mill end bit to safely & accurately make mortises that accept floating tenon stock
                    (Dominos). Making strong mortise & tenon joints is now as easy as using a biscuit joiner.
                       The DF 500 Q Domino Joiner lets you work with
                     stock as narrow as 1” & 1/2” thick. With optional   DOMINO TENONS (solid beech)
                 cutters, the DF 500 Q cuts mortises up to 28mm deep,   DF 500 Q   $26.00 ea.
               handling tenon stock 4, 5, 6, 8 &10mm thick. 7 lbs.  720145 4mm x 20mm (pk 450)
                     With optional cutters for the XL DF 700, you can cut  720128 5mm x 30mm (pk 300)
                     mortises up to 70mm deep & handle tenon stock 8,  720127 6mm x 40mm (pk 190)
                      10, 12 & 14mm thick. 11.4 lbs.     DF 500 Q & XL DF 700  $26.00 ea.
                       The Cross Stop jig for Domino Joiners lets you  720126 8mm x 40mm (pk 130)
     reference from your 1st mortise hole to make subsequent mortises, perfectly   720125 8mm x 50mm (pk 100)
     spaced apart from 3-7/8” to 8-1/16”. The Trim Stop safely & accurately holds   720124 10mm x 50mm (pk 85)
     narrow material 7/8” to 2-3/4” wide.
                                                            XL DF 700   $64.00 ea.
     720141  Domino Joiner DF 500 Q Includes 5mm Cutter & Systainer Case  $1019.00
     720142  DF 500 Q Set with Trim & Cross Stops   $1099.00  720160 8mm x 80mm (pk 190)
     720111  DF 500 Q Cutters & Domino Assort.     $345.00 720161 8mm x 100mm (pk 150)
           5 Cutters (4, 5, 6, 8 & 10mm), assort. of 1060 Dominos & Systainer Case  720162 10mm x 80mm (pk 150)
     720153  Domino Joiner XL DF 700 Includes 12mm Cutter & Systainer Case  $1499.00 720163 10mm x 100mm (pk 120)
     720152  XL DF 700 Set with Trim & Cross Stops   $1599.00  720164 12mm x 100mm (pk 100)
     720154  XL DF 700 Cutters & Domino Assort.    $345.00
           8 & 10mm Cutters, assort. of 308 8mm & 10mm Dominos & Systainer Case  720165 12mm x 140mm (pk 90)
     720155  XL DF 700 Cutters & Domino Assort.    $315.00 720166 14mm 100mm (pk 80)
           14mm Cutter, assort. of 128 12mm & 14mm Dominos & Systainer Case  720167 14mm x 140mm (pk 70)
     720109  Trim Stop (for DF 500 Q & XL DF 700)  $78.00
     720110  Cross Stop (for DF 500 Q & XL DF 700)  $78.00  See our website for more Tenons.
     4   PLEASE NOTE THAT FESTOOL IS EXPERIENCING LIMITED AVAILABILITY
   1   2   3   4   5   6   7   8   9   10   11