Page 10 - jan-feb-mar-2019-highland-woodworking-catalog
P. 10

Workbenches & Hardware                               MADE IN USA
              The Glide Crisscross Leg Vise is perfect  HIVISE HARDWARE
             for a Roubo bench, but will work on your  Construct a small, portable
                own bench design too. The Glide pro-  version of the legendary Benchcrafted
                vides up to 9” of jaw depth. The Criss-  Leg Vise to clamp to your existing benchtop.
                cross mechanism below the screw vise   The HiVise holds your workpiece near eye level, making
                prevents the chop from racking. The   it easier to do close-up handwork joinery. These plans &
                Glide Leg Vise has a Solo & a Retro   instructions are for a vise with jaws that open to 5-1/2”
                style. The Retro version includes at-  with a depth capacity of 5-3/8”. Wood is not included.
     tachment brackets that make installation easier. An 8”   Standard Hardware uses your own clamp or hold-
     dia. cast, 3 knob hand wheel & the 1” acme threaded   fast to mount the HiVise to your bench. Plans also
     rod effortlessly move your vise jaw. Max. jaw opening   show how to use a Benchcrafted Tail vise to secure the
     is approx. 9” but varies depending on bench dimen-  HiVise. Includes 2” dia. hub with acme screw assembly
     sions. Choose either a polished or a textured cast-look   & 10-1/2” handle, (both with black oxide finish), hub
     wheel. Includes hardwood knobs. Glide Vise & Criss-  flanges, Crisscross mechanism with pins & Crubber
     cross hardware weighs approx. 28 lbs.   jaw liners, (rubberized cork). HiVise can also be used
       The “Classic” Leg Vise also       as a leg vise assembly for smaller benches.
     has a smooth action acme screw de-    The Mounting Screw Hardware comes with a sec-
     sign, but with familiar T-handle styling & a Parkerized,   ond acme threaded screw & nut and a 5” cast iron hand
     black matte steel finish. The 15” long handle rod will   wheel that create a built-in clamp for quickly & secure-
     hold its position in the hub so you can position the   ly attaching the HiVise to your workbench. Download
     handle anywhere along its length. Max. jaw opening   instructions for building the HiVise from our website.
     on most installations is 9”. 8.5 lbs. Also available with  135250  HiVise Standard Hardware   $189.00
     Crisscross hardware. Installation instructions & templates   135251  HiVise Hardware w/ Mounting Screw   $259.00
     can be downloaded from our website.  BENCHCRAFTED MOXON VISE HARDWARE
     135232   Glide Crisscross Solo Polished Wheel  $439.00  Holds your work at your ideal
     135237   Glide Crisscross Solo Textured Wheel  $369.00  height for easy access & visibility.
     135233   Glide Crisscross Retro Polished Wheel  $479.00  This hardware includes two
     135238   Glide Crisscross Retro Textured Wheel  $409.00  5” cast iron hand wheels,
     135183   Classic Legt Vise Only    $195.00  two 8” x 3/4” precision rolled
     135184   Classic Leg Vise Crisscross Solo    $294.00  carbon steel acme screws, four 3/4” x 8 tpi nuts, & Crub-
     135185   Classic Leg Vise Crisscross Retro    $334.00  ber (rubberized cork) to mount inside the movable jaw
     BENCHCRAFTED TAIL VISE              for tenacious holding power. Wood for vise not included.
       This massive 5” dia., cast-iron hand wheel   135174   Benchcrafted Moxon Vise Hardware   $149.00
     rotates on a 1-1/4” rolled carbon-steel acme
     thread screw for controlled clamping pres-  BENCHCRAFTED PLANING STOP
                                                     This stop rises above your flat work
     sure. Vise is easier to install than traditional   surface to prevent stock from sliding
     end vises & works for RH or LH installations. Use on a   in the direction you’re hand planing.
     Roubo bench with a 4” thick top, or any top with min.   Serrated edge grips firmly.
     4” thick end cap, dog hole strip & front apron. Turned   Install onto end of a 2-1/2” square x 10”
     wood handle accents beautiful metalwork. Max. travel   long wood billet & cut a square mortise in your
     12-1/4”. Includes mounting hardware. 16 lbs.  bench top to accept the billet for a snug, yet sliding fit. Raise &
     135171   Tail Vise Polished Wheel  $369.00  lower the stop with a tap of your mallet.
     135241   Tail Vise Textured Wheel  $295.00  135196   Benchcrafted Planing Stop   $24.00
     BENCHCRAFTED BENCH MAKER PACKAGES  Bench Maker Packages with Classic Leg Vise
     Includes everything but the wood!    135245  Crisscross Solo Pkg Textured Wheels  $630.00
       Detailed measured drawings         135246  Crisscross Retro Pkg Textured Wheels  $670.00
     for Split Top Roubo Bench, Tail Vise,   Bench Maker Packages with Glide Leg Vise
     Leg Vise (Select Glide or Classic) & all   135234  Crisscross Solo Pkg Polished Wheel  $849.00
     assembly hardware.                   135242  Crisscross Solo Pkg Textured Wheels  $699.00
                                          135235  Crisscross Retro Pkg Polished Wheel
     All packages ship within lower 48 states for $20 surcharge.
                                          135243  Crisscross Retro Pkg Textured Wheels  $738.00
       These plans show you how to build a Roubo style bench & install the vises so that they work perfectly.
     Plans include four 20” x 30” pages of measured drawings with detailed descriptions. Bench is 87” long x 35”
     tall, with a 24” wide x 4” thick benchtop. It weighs over 300 lbs. depending upon the wood species.
     204726   Split Top Roubo Bench Plans   $20.00 Download full construction notes from our website.
           From Forge De Saint-Juéry.      This simple, elegant holdfast is cast from ductile
       The graceful curved gooseneck head of this bench   iron & treated with a hot oil finish. Fits 3/4” dog holes.
      hold down is wheel-buffed to a platinum luster, with   134412   Lie-Nielsen Ductile Iron Holdfast      $50.00
      the subtle details of the hand forging process visible
                                                BENCH BOLTS WITH NUTS
      just below the sheen. Forging & tempering gives it a     Heavy-duty 1/2 x 6” hex head bolts. 25 x
      touch of tensile spring. 6” reach. 13” long 45/64”   25mm (.984”) brass dowel nuts fit 1” hole.
     dia. post fits 3/4” hole. 14-1/4” OAL. 2.85 lbs.  (Will NOT mate with 1/2” x 13 tpi hardware.)
     126161   Auriou Bench Holdfast   $119.99  168045   Bench Bolts (Set of 4)  $19.99
     VERITAS® INSET VISE  Add an adjustable dog to your workbench, (min. 1-1/4” thick).
      The clamping jaw of the inset vise has 4” travel range & 2 mounting positions for the vise
     jaw (3-7/8” apart). This allows full clamping coverage for dog holes up to 7-3/4” apart. Remove
     the vise jaw for a completely flat bench surface. Vise requires room to make a mortise 10-3/4” long
     x 3” wide x 29/32” deep. The Pivoting Jaw, (1/2” tall &   177067  Veritas  Inset Vise    $99.99
     1-1/2” wide ), clamps odd-shaped items. The 1/4” tall   177068  Veritas  Inset Vise Pivoting Jaw   $13.99
     Low Profile Jaw is for planning thin stock.  177122   Veritas Inset Vise Low Profile Jaw  $16.99
   5   6   7   8   9   10   11   12   13   14   15