Page 6 - early-fall-2018-highland-woodworking-catalog
P. 6

Festool                                  CXS
                                               TXS
     FESTool VS CoRDlESS DRillS
     Drilling & driving are made easy with Festool’s durable &
     dependable drills.  Festool’s 3 year warranty includes batteries.
      The  CXS & TXS are Festool’s smallest Li-Ion drills. Compact
     but powerful, they excel at reaching where larger drills can’t go. The   C18
     battery is located low on the handle, for increased balance & comfort for long term use.  T18  PDC18/4
      The larger C18 & T18 have innovative monitoring circuitry with sensors on the electronic
     clutch that disengage the motor (& make an audible signal) when the torque setting is reached. Slide a switch to
     change from a clutch drive setting to drilling mode, & back again, while maintaining the original torque setting.
      The powerful PDC Quadrive has a four-speed gearbox; a low gear to hog out material, mid-range gears for ordi-
     nary drilling needs, & a high-speed hammer function to drill concrete. A tough glass-reinforced nylon housing
     with a cast aluminum cover on the front protects the motor. Removable, multi positional right-angle handle adds
     a sure grip. Max. torque of 531 lbs. in steel & 354 lbs. in wood. (Quadrive Basic does not include battery or charger, but can
     rely on one from another 18V Festool cordless tool.)
     All drills come with 3-Jaw Keyless chuck and a Centrotec chuck, (the lightweight, compact, quick release chuck that accepts
     Festool Centrotec drilling & driving accessories), a magnetic bit holder for 1/4” hex-shanks, built in LED & battery fuel gauge,
     integrated belt clip, on board bit storage & a Systainer case.
          Festool Drill  Chuck   RPMs  Volt Right Angle  Eccentric  Two   Charger   Drill  Price
                  Capacity           Chuck ★  Chuck ♦  Ah Batteries  Weight
     722972 CXS    3/8”  0-400, 0-1200 10.8  No  N/A  2.6 Li-Ion  MXC  1.98 lbs $250.00
     722973 CXS Set  3/8”  0-400, 0-1200 10.8  Yes  N/A  2.6 Li-Ion  MXC  1.98 lbs $300.00
     722993 TXS    3/8”  0-400, 0-1200 10.8  No  N/A  2.6 Li-Ion  MXC  1.98 lbs $250.00
     722994 TXS Set  3/8”  0-400, 0-1200 10.8  Yes  N/A  2.6 Li-Ion  MXC  1.98 lbs $300.00
     722979 C18+3 Set  1/2”  0-450, 0-1500  18  Yes  Yes  5.2 Airstream  SCA 8 ▲  3.75 lbs $660.00
     722985 T18+3 Set  1/2”  0-450, 0-1500  18  Yes  Yes  5.2 Airstream  SCA 8 ▲  3.85 lbs $660.00
     723901 PDC18/4   1/2”  0-400, 0-850,   18  No  N/A  No  No   4.1 lbs  $350.00
          Basic        0-1850, 0-3800
     723903 PDC18/4   1/2”  0-400, 0-850,   18  Yes  N/A  5.2 Airstream  SCA 8 ▲  4.1 lbs  $660.00
          Set          0-1850, 0-3800

     ▲ SCA 8 Airstream Quick Charger recharges batteries 60%   ★ Right Angle Chucks work at right angles to
        faster, (An integrated fan cools the battery so it accepts the     the drill’s axis & rotate 360° in 22.5° increments.
                       charge with less heat build up.)  ♦  Eccentric Chucks offset 1/4” shank bits.
                  FESTool KAPEX KS120 10” SliDing ComPounD miTER SAw
                   The most accurate & versatile sliding compound miter saw available.
                   The unique “rail forward” design of the Kapex makes a compact, (24” x 28”
                  footprint),  lightweight  (47  lbs.)  &  durable  saw.  The  1400-3400  rpm  VS,
                  1600W, 13 amp motor powers the 10” (260 mm), 60T carbide-tipped blade. Cut-
                     ting capacity at 90° is 12” x   720234  Festool Kapex 10” miter Saw   $1475.00
                      3-1/2” & at 45° is 8-7/16” x   720268  ug-Kapex wheeled Stand   $575.00
                     3-7/16”. Miter cuts can be ad-  720267   ug-Kapex wheeled Stand    $960.00
              justed to the left up to 50° & to the right      with l&R Ext. Stock Support (metric)
     up to 60°. Cuts 3/4” stock up to 4-11/16” high. A mi-  720269   l&R Ext. Stock Support, Kapex (metric)  $630.00
     cro adjust dials in left & right bevels up to 47°. Dual   720243  workpiece Clamp, Kapex   $90.00
     lasers cut lines. Connected to a vacuum, the dust collec-  720242  miterFast Transfer Tool   $180.00
                                                                       $160.00
                                         720238  Festool 10” 80T Fine Blade
     tion ability of the saw is astounding. Kapex includes   720239  Festool 10” 64T laminate Blade   $160.00
     60T carbide blade, MiterFast Transfer Tool, workpiece   720240  Festool 10” 68T Alum/Plastic Blade   $149.00
                 hold-down clamp & blade wrench.  720237  Festool 10” 60T universal Blade   $155.00
                 FESTool CRown SToP      720255  2-pk 10” Blades (Universal & Fine Tooth)  $220.00
                  This small table (5-3/8” wide x 8-1/4” deep) quickly clamps to either side of your Kapex
          miter saw. It includes a sliding stop that lets you position crown molding stock against your saw’s
     fence. Get two if you need a crown stop on both sides of the saw.
     Please note: The Crown Stop is not compatible with the Kapex Extensions.  720241  Festool Kapex Crown Stop   $115.00
     FESTool mFT/3-mini TABlE  – for Kapex Sliding Compound Miter Saw
      Integrated side rails & a perforated work surface create a variety of  Height: 31-1/8”
     clamping options. An optional Kapex Clamping Kit bolts through the  Dimensions: 34” x 22”
     Kapex base to the MFT/3-Mini perforated top plate. Large grip plastic  Work Surface: 32 x 20”
     knobs secure the saw. When mounted on the MFT3-Mini, the deck of the  Load Capacity: 260 lbs.
     Kapex Miter Saw will match the height of Festool’s MFT/3  720235  Festool Kapex mFT3-mini Table   $500.00
     Multi-Function Table, allowing support of long stock.  720244   Festool Kapex to mFT3 Clamping Kit  $25.00
              FESTool HK 55 CARPEnTRy CiRCulAR SAwS
                 To quickly & accurately cross cut 2X & 1x lumber on a jobsite or at home.
                 Partnered with the unique FSK 420 guide rail, the HK 55 gives 16.5” of accurate, cross-cut-
                       ting capacity. The aluminum rail, with non-slip grip, lays directly on your cut line
                             for precise cuts. Adjustable rail angle stops make set up for multiple miter
     InCludeS                    cuts simple. The saw stays fully engaged to the rail, regardless of
     18T Carbide Blade           spacial orientation. Sliding forward to cut, the saw self-retracts ef-
     & Systainer Case.        fortlessly along the rail. The saw & rail behave like a single portable
     unit, but the saw can also be uncoupled from the rail & used freehand. Connect a vac to get unmatched dust
     collection for a circular saw.   723246   Festool HK 55EBQ Carpentry Saw (corded) + FSK 420 Rail    $590.00
     6-1/4” blade with 1-15/16”      (VS 2,000 – 5,200 rpm AC universal motor 10 amps 120V)
     depth of cut at 90° & 1-7/16”  723279   Festool HKC 55EB Carpentry Saw (cordless) + FSK420 Rail   $770.00
     at 45°.                    (4,500 rpm DC Brushless motor, two 18V 5.2AH Li-Ion batteries & charger.)
     4  free ground shipping on all festool machines in lower 48 states
   1   2   3   4   5   6   7   8   9   10   11