Page 10 - early-fall-2018-highland-woodworking-catalog
P. 10

workbenches & hardware
                                                  Made
     Lake erie TooLworks Moxon Vise kiT          in usa
     Increase clamping capacity & elevate workpieces for easier access.
      This double screw vise is beautifully crafted from solid unfinished hard maple. (Finish
     with your favorite wiping oil & apply wax to the vise threads.) It gives 24” of clamping width.
     1-3/4” x 4” jaw opens up to 4-1/4” wide. Stout 1-3/4” dia. wood screws have large 7 sided
     handles for non-slip grip. Approx. 14 lbs. The portable vise installs in seconds onto the
     front of your bench with 2 clamps (not included). The front jaw’s bottom edge is 1/8”
     lower than the rear jaw’s edge, letting you instantly register the vise’s rear jaw face flush with the front of your bench.
     137003   Lake erie Moxon Vise kit    $199.00  See our website for more wooden screw vise kits by Lake Erie Toolworks.
          BenchcrafTed GLide LeG Vises BenchcrafTed TaiL Vise
              The Glide Crisscross Leg Vise is perfect    This massive 5” dia., cast-iron hand wheel
             for a Roubo bench, but will work on your  rotates on a 1-1/4” rolled carbon-steel acme
                own bench design too. The Glide pro- thread screw for controlled clamping pres-
                vides up to 9” of jaw depth. The Criss- sure. Vise is easier to install than traditional
                cross mechanism below the screw vise  end vises & works for RH or LH installations. Use on a
                prevents the chop from racking. The  Roubo bench with a 4” thick top, or any top with min.
                Glide Leg Vise has a Solo & a Retro  4” thick end cap, dog hole strip & front apron. Turned
                style. The Retro version includes at- wood handle accents beautiful metalwork. Max. travel
     tachment brackets that make installation easier. An 8”  12-1/4”. Includes mounting hardware. 16 lbs.
     dia. cast, 3 knob hand wheel & the 1” acme threaded   135171   Tail Vise Polished Wheel  $369.00
     rod effortlessly move your vise jaw. Max. jaw opening  135241   Tail Vise Textured Wheel  $295.00
     is approx. 9” but varies depending on bench dimen-
     sions. Choose either a polished or a textured cast-look   BenchcrafTed Moxon Vise hardware
                                         Holds your work at your ideal
     wheel. Includes hardwood knobs. Glide Vise & Criss-  height for easy access & visibility.
     cross hardware weighs approx. 28 lbs.   This hardware includes two
       The “Classic” Leg Vise also       5” cast iron hand wheels,
     has a smooth action acme screw de-  two 8” x 3/4” precision rolled
     sign, but with familiar T-handle styling & a Parkerized,   carbon steel acme screws, four 3/4” x 8 tpi nuts, & Crub-
     black matte steel finish. The 15” long handle rod will   ber (rubberized cork) to mount inside the movable jaw
     hold its position in the hub so you can position the   for tenacious holding power. Wood for vise not included.
     handle anywhere along its length. Max. jaw opening
     on most installations is 9”. 8.5 lbs. Also available with   135174   Benchcrafted Moxon Vise hardware   $149.00
     Crisscross hardware. Installation instructions & templates   BenchcrafTed pLaninG sTop
     can be downloaded from our website.             This stop rises above your flat work
     135232   Glide crisscross solo Polished Wheel  $439.00  surface to prevent stock from sliding in
     135237   Glide crisscross solo Textured Wheel  $369.00  the direction you’re hand planing. Ser-
     135233   Glide crisscross retro Polished Wheel  $479.00  rated edge grips firmly. Install onto end of
     135238   Glide crisscross retro Textured Wheel  $409.00  a 2-1/2” square x 10” long wood billet & cut a
     135183   classic Leg Vise only    $195.00  square mortise in your bench top to accept the billet
     135184   classic Leg Vise crisscross solo    $294.00  for a snug, yet sliding fit. Raise & lower stop with a tap of your mallet.
     135185   classic Leg Vise crisscross retro    $334.00  135196    Benchcrafted planing stop   $24.00
     BenchcrafTed Bench Maker packaGes Includes everything but the wood!
      Detailed measured drawings for Split Top Roubo Bench, Tail Vise, Leg Vise (Glide or Classic)
     & all assembly hardware.   All packages ship within lower 48 states for $20 surcharge.
     Bench Maker packaGes wiTh GLide LeG Vise  Bench Maker packaGes wiTh cLassic LeG Vise
     135234  crisscross solo pkg Polished Wheel  $849.00  135248  crisscross solo pkg Polished Wheel  $704.00
     135242  crisscross solo pkg Textured Wheels  $699.00  135245  crisscross solo pkg Textured Wheels  $630.00
     135235  crisscross retro pkg Polished Wheel  $889.00  135249  crisscross retro pkg Polished Wheel  $744.00
     135243  crisscross retro pkg Textured Wheels  $738.00  135246  crisscross retro pkg Textured Wheels  $670.00
     BenchcrafTed spLiT Top rouBo Bench pLans            Made in usa
       These plans show you how to build a Roubo style bench & install the vises so that they work perfectly.  Plans
     include four 20” x 30” pages of measured drawings with detailed descriptions. Bench is 87” long x 35” tall,
     with a 24” wide x 4” thick benchtop. It weighs over 300 lbs. depending upon the wood species.
     204726   split Top roubo Bench plans   $20.00  Full construction notes can be downloaded from our website.
    Bench BoLTs wiTh nuTs                    VeriTas  Bench hoLd-down
                                                  ®
       Heavy-duty 1/2 x 6” hex head bolts. 25 x   Clamp screw with polished brass hex
    25mm (.984”) brass dowel nuts fit 1” hole.   knob applies high clamping force. Fits 3/4” hole
    These will NOT mate with 1/2” x 13 tpi hardware.  in a bench top or bench leg, where it works as a
         168045   Bench Bolts (Set of 4)  $19.99  panel clamp. Throat capacity & max. height 8”.
                                                       ®
           auriou forGed hoLdfasT         417005   Veritas  hold-down   $84.99
           from forge de saint-Juéry.      iMproVed Bench hoLdfasT More effective
       The graceful curved gooseneck head of this bench   & versatile than single piece style hold downs.
      hold down is wheel-buffed to a platinum luster, with   This holdfast clamps work directly to the bench using
      the subtle details of the hand forging process visible   a 1” hole. An acme screw provides great leverage to
      just below the sheen. Forging & tempering gives it a   force a pivoting arm down, & the pivoting clamp pad
      touch of tensile spring. 6” reach. 13” long 45/64” dia.   helps hold odd  shaped parts. With softwood &
    post fits 3/4” hole. 14-1/4” OAL. 2.85 lbs.  bench tops thinner than 2-1/4”, surface mount the
    126161  auriou Bench holdfast   $119.99  flange to the underside. With tops 1-5/8” thick &
     Lie-nieLsen ducTiLe iron hoLdfasT   greater, flush  mount the flange. Throat capacity &
      This simple, elegant holdfast is cast from ductile   max. height are 8”. Includes holdfast with mounting
     iron & treated with a hot oil finish. Fits 3/4” dog holes.  flange, flange back plate, machine screws & nuts.
     134412   Lie-nielsen ductile iron holdfast      $50.00  310341   improved Bench holdfast   $36.99
     8  our class schedule is under “classes” at highlandwoodworking.com
   5   6   7   8   9   10   11   12   13   14   15